Toyota Yaris 2005: надійність
16 532 техоглядів Toyota Yaris першої реєстрації 2005 року: 28,9% не пройшли через механічний дефект; медіана класу того ж віку й пробігу — 34,9%.
- Відмови через механіку
- 28,9%
- Медіана класу, той самий вік і пробіг
- 34,9%
- Не пройшли MOT (будь-яка причина)
- 45,8%
- техоглядів MOT
- 16 532
- Відкликання
- 5
Що ламається залежно від пробігу
| Пробіг | Техогляди | Механічні відмови | Медіана класу |
|---|---|---|---|
| 0-50k km | 523 | 10,7% | 13,1% |
| 50-100k km | 3 185 | 20,6% | 25,8% |
| 100-150k km | 5 312 | 26,9% | 34,7% |
| 150k+ km | 7 512 | 35,0% | 40,4% |
Що ламається в цьому році випуску
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
The vehicles might have been fitted with an inappropriate replacement airbag inflator.Consequently, in the event of an accident the airbag might not properly deploy, increasing the risk of injuries.
A12/00045/19 ↗null A short circuit may occur in the driver's side power window master switch. The switch assembly may consequently overheat, potentially leading to a fire.
A12/1366/15 ↗null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash,…
A12/0661/15 ↗Повний текст
null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash, resulting in metal fragments injuring the vehicle occupants.
null The seat rail spring may break, in which case the seat may not lock into the adjusted position. If the vehicle is operated with a broken seat rail spring, the seat could move in the event of a crash.
A12/0616/14 ↗null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is…
A12/0617/14 ↗Повний текст
null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is continuously operated in this condition, the steering column assembly could become unsecured.