Toyota Yaris 2005: niezawodność
16 532 badań MOT egzemplarzy Toyota Yaris zarejestrowanych po raz pierwszy w 2005: 28,9% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 34,9%.
- Usterki mechaniczne
- 28,9%
- Mediana klasy, ten sam wiek i przebieg
- 34,9%
- Negatywne badanie (dowolny powód)
- 45,8%
- badań MOT
- 16 532
- Akcje przywoławcze
- 5
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 523 | 10,7% | 13,1% |
| 50-100k km | 3185 | 20,6% | 25,8% |
| 100-150k km | 5312 | 26,9% | 34,7% |
| 150k+ km | 7512 | 35,0% | 40,4% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The vehicles might have been fitted with an inappropriate replacement airbag inflator.Consequently, in the event of an accident the airbag might not properly deploy, increasing the risk of injuries.
A12/00045/19 ↗null A short circuit may occur in the driver's side power window master switch. The switch assembly may consequently overheat, potentially leading to a fire.
A12/1366/15 ↗null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash,…
A12/0661/15 ↗Pełny tekst
null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash, resulting in metal fragments injuring the vehicle occupants.
null The seat rail spring may break, in which case the seat may not lock into the adjusted position. If the vehicle is operated with a broken seat rail spring, the seat could move in the event of a crash.
A12/0616/14 ↗null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is…
A12/0617/14 ↗Pełny tekst
null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is continuously operated in this condition, the steering column assembly could become unsecured.