Toyota Yaris 2014: niezawodność
29 045 badań MOT egzemplarzy Toyota Yaris zarejestrowanych po raz pierwszy w 2014: 11,0% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 20,1%.
- Usterki mechaniczne
- 11,0%
- Mediana klasy, ten sam wiek i przebieg
- 20,1%
- Negatywne badanie (dowolny powód)
- 24,2%
- badań MOT
- 29 045
- Akcje przywoławcze
- 6
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 3981 | 6,0% | 8,7% |
| 50-100k km | 12 904 | 9,5% | 17,6% |
| 100-150k km | 8637 | 12,9% | 24,5% |
| 150k+ km | 3523 | 17,5% | 30,8% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The wire harnesses of the side airbag sensors could crack and the wires may corrode. In the event of a crash the front seat airbags and the curtain shield airbags may not deploy, increasing the risk of injury.
A12/0734/19 ↗null A fault in the gas generator of the driver airbag could cause uncontrolled inflation of the airbag when activated, leading to an increased risk of injury.
A12/1042/17 ↗The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of…
15V134000 ↗Pełny tekst
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2015 Yaris vehicles manufactured August 31, 2011, to February 9, 2015, and sold or registered in Puerto Rico. The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, " Occupant Protection in Interior Impact."
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle…
A12/0276/15 ↗Pełny tekst
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle operation and could eventually detach. The detached bolt(s) could damage rear brake components during rotation, resulting in a reduction of brake performance or a potential wheel lock up, which could increase the risk of a crash.
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and…
A12/0235/15 ↗Pełny tekst
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and rear brake system functionality may be lost in the event that brake fluid leaks from the front brake system. This could lead to a crash.
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…
A12/1918/14 ↗Pełny tekst
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.