Toyota Yaris 2014: reliability
29,045 MOT tests of Toyota Yaris cars first registered in 2014: 11.0% failed for a mechanical defect; the class median at the same age and mileage is 20.1%.
- Mechanical failure rate
- 11.0%
- Class median, same age and mileage
- 20.1%
- Failed MOT (any reason)
- 24.2%
- MOT tests
- 29,045
- Recalls
- 6
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 3,981 | 6.0% | 8.7% |
| 50-100k km | 12,904 | 9.5% | 17.6% |
| 100-150k km | 8,637 | 12.9% | 24.5% |
| 150k+ km | 3,523 | 17.5% | 30.8% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The wire harnesses of the side airbag sensors could crack and the wires may corrode. In the event of a crash the front seat airbags and the curtain shield airbags may not deploy, increasing the risk of injury.
A12/0734/19 ↗null A fault in the gas generator of the driver airbag could cause uncontrolled inflation of the airbag when activated, leading to an increased risk of injury.
A12/1042/17 ↗The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of…
15V134000 ↗Full text
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2015 Yaris vehicles manufactured August 31, 2011, to February 9, 2015, and sold or registered in Puerto Rico. The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, " Occupant Protection in Interior Impact."
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle…
A12/0276/15 ↗Full text
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle operation and could eventually detach. The detached bolt(s) could damage rear brake components during rotation, resulting in a reduction of brake performance or a potential wheel lock up, which could increase the risk of a crash.
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and…
A12/0235/15 ↗Full text
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and rear brake system functionality may be lost in the event that brake fluid leaks from the front brake system. This could lead to a crash.
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…
A12/1918/14 ↗Full text
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.