Toyota Yaris 2014: fiabilidad
29.045 inspecciones MOT de Toyota Yaris matriculados por primera vez en 2014: el 11,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 20,1 %.
- Tasa de fallo mecánico
- 11,0%
- Mediana de la clase, misma edad y kilometraje
- 20,1%
- No pasó la MOT (cualquier motivo)
- 24,2%
- inspecciones MOT
- 29.045
- Llamadas a revisión
- 6
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 3981 | 6,0% | 8,7% |
| 50-100k km | 12.904 | 9,5% | 17,6% |
| 100-150k km | 8637 | 12,9% | 24,5% |
| 150k+ km | 3523 | 17,5% | 30,8% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The wire harnesses of the side airbag sensors could crack and the wires may corrode. In the event of a crash the front seat airbags and the curtain shield airbags may not deploy, increasing the risk of injury.
A12/0734/19 ↗null A fault in the gas generator of the driver airbag could cause uncontrolled inflation of the airbag when activated, leading to an increased risk of injury.
A12/1042/17 ↗The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of…
15V134000 ↗Texto completo
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2015 Yaris vehicles manufactured August 31, 2011, to February 9, 2015, and sold or registered in Puerto Rico. The affected vehicles may have been manufactured with a roof headliner that does not provide the proper occupant protection in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 201, " Occupant Protection in Interior Impact."
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle…
A12/0276/15 ↗Texto completo
null There is a possibility that one or more of the rear axle bearing bolts could have been tightened insufficiently during the manufacturing process. In this condition, the bolt(s) could become loose during vehicle operation and could eventually detach. The detached bolt(s) could damage rear brake components during rotation, resulting in a reduction of brake performance or a potential wheel lock up, which could increase the risk of a crash.
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and…
A12/0235/15 ↗Texto completo
null The brake reservoir tank is designed for left hand drive Yaris hybrid vehicles. Due to the design of the chamber divider in the reservoir tank which separates the front and rear brake fluid lines, both front and rear brake system functionality may be lost in the event that brake fluid leaks from the front brake system. This could lead to a crash.
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…
A12/1918/14 ↗Texto completo
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.