Toyota Yaris 2005: reliability
16,532 MOT tests of Toyota Yaris cars first registered in 2005: 28.9% failed for a mechanical defect; the class median at the same age and mileage is 34.9%.
- Mechanical failure rate
- 28.9%
- Class median, same age and mileage
- 34.9%
- Failed MOT (any reason)
- 45.8%
- MOT tests
- 16,532
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 523 | 10.7% | 13.1% |
| 50-100k km | 3,185 | 20.6% | 25.8% |
| 100-150k km | 5,312 | 26.9% | 34.7% |
| 150k+ km | 7,512 | 35.0% | 40.4% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The vehicles might have been fitted with an inappropriate replacement airbag inflator.Consequently, in the event of an accident the airbag might not properly deploy, increasing the risk of injuries.
A12/00045/19 ↗null A short circuit may occur in the driver's side power window master switch. The switch assembly may consequently overheat, potentially leading to a fire.
A12/1366/15 ↗null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash,…
A12/0661/15 ↗Full text
null The inflator of the driver’s front airbag assembly may have an increased potential for moisture intrusion over time. This could potentially make the inflator assembly more susceptible to rupture during a crash, resulting in metal fragments injuring the vehicle occupants.
null The seat rail spring may break, in which case the seat may not lock into the adjusted position. If the vehicle is operated with a broken seat rail spring, the seat could move in the event of a crash.
A12/0616/14 ↗null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is…
A12/0617/14 ↗Full text
null Due to insufficient strength of the steering column mounting bracket, if the steering wheel is frequently and forcefully turned to the full-lock position, a crack could develop in the bracket. If the vehicle is continuously operated in this condition, the steering column assembly could become unsecured.