Jaguar XE 2019: надійність
4 606 техоглядів Jaguar XE першої реєстрації 2019 року: 6,4% не пройшли через механічний дефект; медіана класу того ж віку й пробігу — 4,3%.
- Відмови через механіку
- 6,4%
- Медіана класу, той самий вік і пробіг
- 4,3%
- Не пройшли MOT (будь-яка причина)
- 16,4%
- техоглядів MOT
- 4 606
- Відкликання
- 3
Що ламається залежно від пробігу
| Пробіг | Техогляди | Механічні відмови | Медіана класу |
|---|---|---|---|
| 0-50k km | 1 665 | 3,9% | 2,4% |
| 50-100k km | 2 324 | 7,2% | 4,9% |
| 100-150k km | 517 | 10,1% | 6,8% |
| 150k+ km | 100 | 11,0% | 7,3% |
Що ламається в цьому році випуску
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
Due to wiring damage in the trunk, the rearview camera image may not appear on the display.
25V017000 ↗Повний текст
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019-2020 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display.
Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear…
23V501000 ↗Повний текст
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As…
A12/01349/21 ↗Повний текст
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.