Jaguar XE 2019: niezawodność
4606 badań MOT egzemplarzy Jaguar XE zarejestrowanych po raz pierwszy w 2019: 6,4% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 4,3%.
- Usterki mechaniczne
- 6,4%
- Mediana klasy, ten sam wiek i przebieg
- 4,3%
- Negatywne badanie (dowolny powód)
- 16,4%
- badań MOT
- 4606
- Akcje przywoławcze
- 3
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 1665 | 3,9% | 2,4% |
| 50-100k km | 2324 | 7,2% | 4,9% |
| 100-150k km | 517 | 10,1% | 6,8% |
| 150k+ km | 100 | 11,0% | 7,3% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Due to wiring damage in the trunk, the rearview camera image may not appear on the display.
25V017000 ↗Pełny tekst
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019-2020 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display.
Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear…
23V501000 ↗Pełny tekst
Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As…
A12/01349/21 ↗Pełny tekst
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.