AutoDefects
Français

Jaguar XE 2019 : fiabilité

51 % de défaillances mécaniques en plus que la catégorie

4 606 contrôles MOT de Jaguar XE immatriculées pour la première fois en 2019 : 6,4 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 4,3 %.

Taux de défaillance mécanique
6,4%
Médiane de la catégorie, même âge et kilométrage
4,3%
Recalés (toute raison)
16,4%
contrôles MOT
4 606
Rappels
3

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km1 6653,9%2,4%
50-100k km2 3247,2%4,9%
100-150k km51710,1%6,8%
150k+ km10011,0%7,3%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues2,2%
Freins2,7%
Moteur, échappement et émissions1,4%
Direction0,1%
Carrosserie, châssis et corrosion0,2%
Ceintures et airbags0,5%
Éclairage et électricité (usure)2,9%
Pneus (usure)7,0%
Essuie-glaces et pare-brise (usure)3,2%
Divers et plaques (usure)0,2%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • NHTSA (US)2019, 2020

    Due to wiring damage in the trunk, the rearview camera image may not appear on the display.

    Texte complet

    Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019-2020 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display.

    25V017000 ↗
  • NHTSA (US)2019

    Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear…

    Texte complet

    Jaguar Land Rover North America, LLC (Jaguar) is recalling certain 2019 Jaguar XE vehicles. Due to wiring damage in the trunk, the rearview camera image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

    23V501000 ↗
  • EU Safety Gate2019–2021

    Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As…

    Texte complet

    Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.

    A12/01349/21 ↗