Jaguar E-PACE 2020 : fiabilité
6 278 contrôles MOT de Jaguar E-PACE immatriculées pour la première fois en 2020 : 3,6 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 2,7 %.
- Taux de défaillance mécanique
- 3,6%
- Médiane de la catégorie, même âge et kilométrage
- 2,7%
- Recalés (toute raison)
- 10,3%
- contrôles MOT
- 6 278
- Rappels
- 4
Ce qui lâche selon le kilométrage
| Kilométrage | Contrôles | Défaillance mécanique | Médiane catégorie |
|---|---|---|---|
| 0-50k km | 3 381 | 2,5% | 1,9% |
| 50-100k km | 2 679 | 4,6% | 3,5% |
| 100-150k km | 200 | 7,0% | 5,4% |
| 150k+ km | 18 | 16,7% | 5,5% |
Ce qui lâche sur cette année
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
A defective module has been installed in the high-voltage battery, which may cause it to overheat and could lead to a fire.
SR/01969/26 ↗The front-seat passenger airbag is incorrectly folded and may therefore tear when it is deployed. This may cause injuries to passengers. In addition, hot gases could leak out and vehicle occupants could sustain burns.
SR/04434/25 ↗During its deployment, the passenger airbag may tear due to the facial airbag deployment door panel not being sufficiently weakened. A torn airbag may reduce the occupant protection, increase risk of injuries in the…
A12/02472/24 ↗Texte complet
During its deployment, the passenger airbag may tear due to the facial airbag deployment door panel not being sufficiently weakened. A torn airbag may reduce the occupant protection, increase risk of injuries in the event of an accident.Moreover, a torn airbag could release hot gases, causing burns to occupants.
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As…
A12/01349/21 ↗Texte complet
Due to manufacturing defect, the support wire grid between the inner and outer layers of the fuel injector rubber return pipe may not provide sufficient support, which may cause the pipe to bend and break over time. As a result, fuel could leak into the cold side of the motor compartment and onto the road surface, posing a risk to the following traffic.