AutoDefects
Français

Citroën C3 2018 : fiabilité

18 % de défaillances mécaniques en moins que la catégorie

15 930 contrôles MOT de Citroën C3 immatriculées pour la première fois en 2018 : 9,0 % recalées pour un défaut mécanique ; la médiane de la catégorie au même âge et kilométrage est de 11,0 %.

Taux de défaillance mécanique
9,0%
Médiane de la catégorie, même âge et kilométrage
11,0%
Recalés (toute raison)
20,2%
contrôles MOT
15 930
Rappels
7

Ce qui lâche selon le kilométrage

KilométrageContrôlesDéfaillance mécaniqueMédiane catégorie
0-50k km4 8844,8%6,2%
50-100k km9 1209,3%12,2%
100-150k km1 67617,1%17,1%
150k+ km25023,2%18,3%

Ce qui lâche sur cette année

OrganeDéfaillance mécanique
Suspension et roues1,9%
Freins3,1%
Moteur, échappement et émissions2,4%
Direction0,3%
Carrosserie, châssis et corrosion2,7%
Ceintures et airbags0,2%
Éclairage et électricité (usure)8,2%
Pneus (usure)5,3%
Essuie-glaces et pare-brise (usure)2,7%
Divers et plaques (usure)0,1%

Rappels officiels

Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.

  • EU Safety Gate2015–2024

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared.…

    Texte complet

    The malfunction indicator light (MIL) may fail to illuminate if the diagnostic system of the Selective Catalytic Reduction (SCR) and/or the diesel particulate filter (DPF) malfunctions after a fault code has appeared. This could cause the vehicle to operate without the required warning, and resulting in emissions above the regulatory limits.

    SR/03151/25 ↗
  • EU Safety Gate2017–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Texte complet

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02655/25 ↗
  • EU Safety Gate2014–2018

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of…

    Texte complet

    The teeth of the timing belt may wear off prematurely due to excessive dynamic tension in dusty conditions. As a result, the engine may stall at high engine speeds and not being able to restart, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

    A12/01186/21 ↗
  • EU Safety Gate2018, 2019

    The ballast in the rear part of the vehicle could be absent.This can impair the vehicle's directional stability, increasing the risk of an accident.

    A12/00127/20 ↗
  • EU Safety GateGrave2016–2019

    A protruding weld stud may damage the bodywork wire harness and lead to a short-circuit. This may consequently cause a fire.

    A12/0584/19 ↗
  • EU Safety GateGrave2018

    The steering column may have been incorrectly fixed to the shaft of the vehicle's steering system. The steering column might consequently detach from the steering system, leading to a loss of steering control.

    A12/0238/19 ↗
Afficher 1 rappels de plus
  • EU Safety GateGrave2018

    The steering column assembly may not be correct. This could lead to a loss of steering control.

    A12/1357/18 ↗