AutoDefects
English

Mercedes-Benz S-Class 2022: reliability

44% fewer mechanical failures than the class

344 MOT tests of Mercedes-Benz S-Class cars first registered in 2022: 0.6% failed for a mechanical defect; the class median at the same age and mileage is 1.0%.

Mechanical failure rate
0.6%
Class median, same age and mileage
1.0%
Failed MOT (any reason)
5.8%
MOT tests
344
Recalls
7

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km990.0%0.0%
50-100k km1660.6%1.4%
100-150k km681.5%1.9%
150k+ km110.0%0.0%

What fails on this year

SystemMechanical fail
Suspension and wheels0.3%
Brakes0.3%
Engine, exhaust and emissions0.0%
Steering0.0%
Body, chassis and corrosion0.0%
Seat belts and airbags0.0%
Lights and electrics (wear)0.3%
Tyres (wear)5.2%
Wipers and windscreen (wear)0.0%
Other and plates (wear)0.0%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2019–2024

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an…

    Full text

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an accident.

    SR/03179/26 ↗
  • EU Safety GateSerious2020–2023

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust…

    Full text

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust temperatures can increase and this can damage surrounding components (e.g. engine wiring harness, catalytic converter). This can create an unexpected loss of propulsion, increasing the risk of accidents and injuries. Moreover, this can increase the risk of fire. In addition, local statutory exhaust emission limits could be exceeded.

    A12/03598/24 ↗
  • EU Safety Gate2022, 2023

    The catch fixing the wheel hubcaps may not withstand the pressures encountered during driving. In such cases, the hubcaps could detach from the vehicle, increasing the risk of accident and injury to other road users.

    A12/00485/24 ↗
  • EU Safety GateSerious2020–2023

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in…

    Full text

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in temperature, increasing the risk of an accident or fire.

    A12/02416/23 ↗
  • EU Safety GateSerious2020–2022

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose…

    Full text

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose propulsion power, increasing the risk of an accident.

    A12/02133/23 ↗
  • EU Safety GateSerious2022

    The instrument panel may detach, thereby affecting the deployment performance of the passenger airbag in the event of an accident, increasing the risk of injury.

    A12/00856/23 ↗
Show 1 more recalls
  • EU Safety Gate2021, 2022

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency…

    Full text

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency braking. This leads to loss of control over the vehicle, increasing the risk of an accident.

    A12/00610/22 ↗