AutoDefects
English

Mercedes-Benz S-Class 2019: reliability

36% fewer mechanical failures than the class

2,454 MOT tests of Mercedes-Benz S-Class cars first registered in 2019: 2.9% failed for a mechanical defect; the class median at the same age and mileage is 4.6%.

Mechanical failure rate
2.9%
Class median, same age and mileage
4.6%
Failed MOT (any reason)
8.7%
MOT tests
2,454
Recalls
9

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km4601.7%3.2%
50-100k km8233.3%4.3%
100-150k km6373.5%5.3%
150k+ km5342.8%5.4%

What fails on this year

SystemMechanical fail
Suspension and wheels1.3%
Brakes0.8%
Engine, exhaust and emissions0.9%
Steering0.0%
Body, chassis and corrosion0.0%
Seat belts and airbags0.1%
Lights and electrics (wear)0.7%
Tyres (wear)5.0%
Wipers and windscreen (wear)0.7%
Other and plates (wear)0.5%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2019–2024

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an…

    Full text

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an accident.

    SR/03179/26 ↗
  • EU Safety Gate2012–2020

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…

    Full text

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.

    A12/00730/21 ↗
  • EU Safety GateSerious2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Full text

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety Gate2019

    Due to a defect in the high fuel pressure manifold the engine might be damaged. This may lead to reduced engine power and to inability to start the vehicle, increasing the risk of an accident.

    A12/00968/22 ↗
  • EU Safety GateSerious2017–2021

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…

    Full text

    The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.

    A12/00045/22 ↗
  • EU Safety Gate2019, 2020

    The middle fold-down rear headrest may not be correctly locked into the in-use position.This could impair its protective effect, increasing the risk of injury in the event of an accident.

    A12/01357/21 ↗
Show 3 more recalls
  • EU Safety GateSerious2018–2020

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…

    Full text

    Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.

    A12/01336/20 ↗
  • EU Safety GateSerious2018, 2019

    The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components,…

    Full text

    The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components, increasing the risk of fire.

    A12/01046/20 ↗
  • EU Safety Gate2017–2019

    The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the…

    Full text

    The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the escaped oil could leak onto the road, posing a risk to the following traffic.

    A12/00923/20 ↗