Mercedes-Benz S-Class 2013: reliability
970 MOT tests of Mercedes-Benz S-Class cars first registered in 2013: 12.9% failed for a mechanical defect; the class median at the same age and mileage is 12.9%.
- Mechanical failure rate
- 12.9%
- Class median, same age and mileage
- 12.9%
- Failed MOT (any reason)
- 19.4%
- MOT tests
- 970
- Recalls
- 6
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 33 | 6.1% | 7.2% |
| 50-100k km | 138 | 9.4% | 9.1% |
| 100-150k km | 275 | 11.6% | 11.6% |
| 150k+ km | 524 | 14.9% | 14.9% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage…
SR/03711/24 ↗Full text
The three aluminium screws of the steering box may corrode due to exposure to spray water and aggressive road-grit (salt) used for melting ice. Advanced corrosion could weaken the screws, leading to potential breakage during manoeuvring or parking. If all fixing screws fail, the power-assisted steering could detach, resulting in a loss of power steering and an increased risk of an accident.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Full text
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
The aluminium bolts of the steering box may break. This can lead to detachment of the steering box from the power block, creating a risk of an accident.
A12/00185/23 ↗null The power-assisted steering control units may have been fitted with defectively welded contacts. As a result, a permanent electrical connection between the contacts cannot be guaranteed, which could lead to loss of…
A12/0082/17 ↗Full text
null The power-assisted steering control units may have been fitted with defectively welded contacts. As a result, a permanent electrical connection between the contacts cannot be guaranteed, which could lead to loss of support to the power-assisted steering and thus an increased risk of accidents.
null The front seatbelts were installed on the wrong sides and may not lock as required. In the event of an accident there is an increased risk of injury.
A12/1669/15 ↗null It is possible that the seat belt end mount connection has not been fitted correctly to the front seats. As a result, the restraining effect may be compromised under heavy stress.
A12/0035/14 ↗