AutoDefects
Deutsch

Mercedes-Benz S-Class 2022: Zuverlässigkeit

44% weniger technische Mängel als die Klasse

344 MOT-Prüfungen von Mercedes-Benz S-Class mit Erstzulassung 2022: 0,6% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 1,0%.

Technische Mängelquote
0,6%
Klassenmedian, gleiches Alter und gleiche Laufleistung
1,0%
Durchgefallen (jeder Grund)
5,8%
MOT-Prüfungen
344
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km990,0%0,0%
50-100k km1660,6%1,4%
100-150k km681,5%1,9%
150k+ km110,0%0,0%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder0,3%
Bremsen0,3%
Motor, Abgasanlage und Emissionen0,0%
Lenkung0,0%
Karosserie, Rahmen und Rost0,0%
Gurte und Airbags0,0%
Licht und Elektrik (Verschleiß)0,3%
Reifen (Verschleiß)5,2%
Wischer und Scheibe (Verschleiß)0,0%
Sonstiges und Kennzeichen (Verschleiß)0,0%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2019–2024

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an…

    Volltext

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an accident.

    SR/03179/26 ↗
  • EU Safety GateErnst2020–2023

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust…

    Volltext

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust temperatures can increase and this can damage surrounding components (e.g. engine wiring harness, catalytic converter). This can create an unexpected loss of propulsion, increasing the risk of accidents and injuries. Moreover, this can increase the risk of fire. In addition, local statutory exhaust emission limits could be exceeded.

    A12/03598/24 ↗
  • EU Safety Gate2022, 2023

    The catch fixing the wheel hubcaps may not withstand the pressures encountered during driving. In such cases, the hubcaps could detach from the vehicle, increasing the risk of accident and injury to other road users.

    A12/00485/24 ↗
  • EU Safety GateErnst2020–2023

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in…

    Volltext

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in temperature, increasing the risk of an accident or fire.

    A12/02416/23 ↗
  • EU Safety GateErnst2020–2022

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose…

    Volltext

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose propulsion power, increasing the risk of an accident.

    A12/02133/23 ↗
  • EU Safety GateErnst2022

    The instrument panel may detach, thereby affecting the deployment performance of the passenger airbag in the event of an accident, increasing the risk of injury.

    A12/00856/23 ↗
1 weitere Rückrufe anzeigen
  • EU Safety Gate2021, 2022

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency…

    Volltext

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency braking. This leads to loss of control over the vehicle, increasing the risk of an accident.

    A12/00610/22 ↗