AutoDefects
Polski

Mercedes-Benz S-Class 2022: niezawodność

o 44% mniej usterek mechanicznych niż w klasie

344 badań MOT egzemplarzy Mercedes-Benz S-Class zarejestrowanych po raz pierwszy w 2022: 0,6% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 1,0%.

Usterki mechaniczne
0,6%
Mediana klasy, ten sam wiek i przebieg
1,0%
Negatywne badanie (dowolny powód)
5,8%
badań MOT
344
Akcje przywoławcze
7

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km990,0%0,0%
50-100k km1660,6%1,4%
100-150k km681,5%1,9%
150k+ km110,0%0,0%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła0,3%
Hamulce0,3%
Silnik, wydech i emisja0,0%
Układ kierowniczy0,0%
Nadwozie, podwozie i korozja0,0%
Pasy i poduszki powietrzne0,0%
Oświetlenie i elektryka (eksploatacja)0,3%
Opony (eksploatacja)5,2%
Wycieraczki i szyba (eksploatacja)0,0%
Inne i tablice (eksploatacja)0,0%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety Gate2019–2024

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an…

    Pełny tekst

    The front axle brake hoses may develop a leak, causing brake fluid to escape. This could reduce braking performance and, if the fluid spills onto the road, reduce grip for following vehicles, increasing the risk of an accident.

    SR/03179/26 ↗
  • EU Safety GatePoważne2020–2023

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust…

    Pełny tekst

    In the event of an independent hardware failure, the lambda control in the Engine Control Unit (ECU) software can erroneously increase the amount of injected fuel during cylinder deactivation. As a result, exhaust temperatures can increase and this can damage surrounding components (e.g. engine wiring harness, catalytic converter). This can create an unexpected loss of propulsion, increasing the risk of accidents and injuries. Moreover, this can increase the risk of fire. In addition, local statutory exhaust emission limits could be exceeded.

    A12/03598/24 ↗
  • EU Safety Gate2022, 2023

    The catch fixing the wheel hubcaps may not withstand the pressures encountered during driving. In such cases, the hubcaps could detach from the vehicle, increasing the risk of accident and injury to other road users.

    A12/00485/24 ↗
  • EU Safety GatePoważne2020–2023

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in…

    Pełny tekst

    The 12 volt ground wire screw in the trunk may be defective, which can lead to that certain electronic stability program (ESP) functions can be disabled or strong electrical currents may lead to a local increase in temperature, increasing the risk of an accident or fire.

    A12/02416/23 ↗
  • EU Safety GatePoważne2020–2022

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose…

    Pełny tekst

    The fuse box of the engine compartment may be defective. High electrical currents could increase the temperature, creating a risk of fire. This is turn can lead to an electricity interruption and the vehicle may lose propulsion power, increasing the risk of an accident.

    A12/02133/23 ↗
  • EU Safety GatePoważne2022

    The instrument panel may detach, thereby affecting the deployment performance of the passenger airbag in the event of an accident, increasing the risk of injury.

    A12/00856/23 ↗
Pokaż jeszcze 1 akcji
  • EU Safety Gate2021, 2022

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency…

    Pełny tekst

    Improper welding on the rear axle can cause the thrust rod to come loose from the rear axle bracket. This may cause the vehicle to swerve in response to the road surface or the vehicle may skid sideways during emergency braking. This leads to loss of control over the vehicle, increasing the risk of an accident.

    A12/00610/22 ↗