Mercedes-Benz S-Class 2018: niezawodność
2346 badań MOT egzemplarzy Mercedes-Benz S-Class zarejestrowanych po raz pierwszy w 2018: 4,4% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 6,2%.
- Usterki mechaniczne
- 4,4%
- Mediana klasy, ten sam wiek i przebieg
- 6,2%
- Negatywne badanie (dowolny powód)
- 9,7%
- badań MOT
- 2346
- Akcje przywoławcze
- 10
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 384 | 1,8% | 3,1% |
| 50-100k km | 794 | 5,8% | 5,7% |
| 100-150k km | 526 | 3,6% | 6,4% |
| 150k+ km | 642 | 5,0% | 8,4% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Pełny tekst
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Pełny tekst
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Pełny tekst
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…
A12/01336/20 ↗Pełny tekst
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.
The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components,…
A12/01046/20 ↗Pełny tekst
The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components, increasing the risk of fire.
The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the…
A12/00923/20 ↗Pełny tekst
The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the escaped oil could leak onto the road, posing a risk to the following traffic.
Pokaż jeszcze 4 akcji
The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.
A12/1794/19 ↗The A, B and C pillar trims may not have been correctly fastened. In the event of an accident, the trims may impair the efficacy of the window airbags. If the window airbags are deployed, the trims might be detached and…
A12/1514/19 ↗Pełny tekst
The A, B and C pillar trims may not have been correctly fastened. In the event of an accident, the trims may impair the efficacy of the window airbags. If the window airbags are deployed, the trims might be detached and propelled into the passenger compartment, increasing the risk of injuries.
The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic).…
A12/0268/19 ↗Pełny tekst
The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic). In the event of an accident, these might not work leading to a limited restraint capacity and increasing the risk of injury to the occupants.
On certain vehicles, the nuts to attach the conductor rails inside the fuse box in the boot may not have been installed. This could lead to increased contact resistance between the conductor rails and, as a consequence,…
A12/1153/18 ↗Pełny tekst
On certain vehicles, the nuts to attach the conductor rails inside the fuse box in the boot may not have been installed. This could lead to increased contact resistance between the conductor rails and, as a consequence, cause a fire or failure in the engine functioning, seat belt functions and the dashboard, leading to an increased risk of accident and injury.