Mercedes-Benz S-Class 2018: надійність
2 346 техоглядів Mercedes-Benz S-Class першої реєстрації 2018 року: 4,4% не пройшли через механічний дефект; медіана класу того ж віку й пробігу — 6,2%.
- Відмови через механіку
- 4,4%
- Медіана класу, той самий вік і пробіг
- 6,2%
- Не пройшли MOT (будь-яка причина)
- 9,7%
- техоглядів MOT
- 2 346
- Відкликання
- 10
Що ламається залежно від пробігу
| Пробіг | Техогляди | Механічні відмови | Медіана класу |
|---|---|---|---|
| 0-50k km | 384 | 1,8% | 3,1% |
| 50-100k km | 794 | 5,8% | 5,7% |
| 100-150k km | 526 | 3,6% | 6,4% |
| 150k+ km | 642 | 5,0% | 8,4% |
Що ламається в цьому році випуску
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Повний текст
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Повний текст
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the…
A12/00045/22 ↗Повний текст
The vacuum-controlled coolant pump may not be tightly sealed between the coolant and vacuum circuits. This may result in the coolant leaking into the vacuum circuit leading to an electrochemical reaction, increasing the risk of fire.
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose…
A12/01336/20 ↗Повний текст
Due to the lack of documentation, there is no confirmation that the screw connections of the turbocharger’s oil-supply and oil-return pipes were correctly executed during the assembly process. In the event of a loose screw connection, oil might leak at the oil-supply and/or oil-return pipe of the turbocharger.The leaking oil might then come into contact with hot components, increasing the risk of fire.
The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components,…
A12/01046/20 ↗Повний текст
The elastomer material of the oil feed line for the exhaust-gas turbocharger may not comply with the specification, allowing oil to leak out.Consequently, the leaking oil could come into contact with hot components, increasing the risk of fire.
The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the…
A12/00923/20 ↗Повний текст
The material used in two closure plugs on the engine might not be able to withstand the maximum load under dynamic driving conditions, allowing up to 9 liters of engine oil to escape around the plugs. Consequently, the escaped oil could leak onto the road, posing a risk to the following traffic.
Показати ще 4 відкликань
The fixing screw connecting the base holder of the manual control device may not be correctly fitted. This can impair the control over the vehicle, increasing the risk of an accident.
A12/1794/19 ↗The A, B and C pillar trims may not have been correctly fastened. In the event of an accident, the trims may impair the efficacy of the window airbags. If the window airbags are deployed, the trims might be detached and…
A12/1514/19 ↗Повний текст
The A, B and C pillar trims may not have been correctly fastened. In the event of an accident, the trims may impair the efficacy of the window airbags. If the window airbags are deployed, the trims might be detached and propelled into the passenger compartment, increasing the risk of injuries.
The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic).…
A12/0268/19 ↗Повний текст
The sensors in some seatbelt locks may not have been adequately manufactured. Consequently, they might not detect a correctly fastened seatbelt and thus not activate the pre-tensioner systems (electric and pyrotechnic). In the event of an accident, these might not work leading to a limited restraint capacity and increasing the risk of injury to the occupants.
On certain vehicles, the nuts to attach the conductor rails inside the fuse box in the boot may not have been installed. This could lead to increased contact resistance between the conductor rails and, as a consequence,…
A12/1153/18 ↗Повний текст
On certain vehicles, the nuts to attach the conductor rails inside the fuse box in the boot may not have been installed. This could lead to increased contact resistance between the conductor rails and, as a consequence, cause a fire or failure in the engine functioning, seat belt functions and the dashboard, leading to an increased risk of accident and injury.