Pick-up
Fiabilité Nissan Navara
Sur 73 320 contrôles MOT britanniques, 23,7 % des Nissan Navara ont été recalées pour un défaut mécanique ou de structure. Médiane d’une pick-up du même âge et kilométrage : 20,8 %.
- Meilleures années
- —
- Années avec le plus de défaillances
- 2017, 2018, 2019
- Point faible à fort kilométrage
- Direction, Moteur, échappement et émissions
- Rappels officiels
- 9 rappels, dont 6 graves
- Taux de défaillance mécanique
- 23,7%
- Médiane de la catégorie, même âge et kilométrage
- 20,8%
- contrôles MOT
- 73 320
- Plaintes aux États-Unis
- 0
Résultats MOT par année de contrôle
L’ensemble des voitures de ce modèle au contrôle de chaque année, face à la catégorie au même âge et kilométrage. Montre si le modèle tient son rang en vieillissant.
| Année du contrôle | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut |
|---|---|---|---|---|
| 2024 | 73 320 | 23,7% | 20,8% | 31,9% |
| 2023 | 71 282 | 24,2% | 21,6% | 32,8% |
Taux de défaillance par année de première immatriculation
Taux de défaillance mécanique au contrôle MOT 2024, par année de première immatriculation, comparé à la médiane de la catégorie au même âge et kilométrage.
| Année | Contrôles | Défaillance mécanique | Médiane catégorie | Tout défaut | Rappels |
|---|---|---|---|---|---|
| 2021 | 7 049 | 7,6% | 7,6% | 15,5% | 0 |
| 2020 | 4 452 | 11,9% | 10,5% | 19,7% | 0 |
| 2019 | 7 480 | 14,7% | 12,0% | 21,6% | 0 |
| 2018 | 7 923 | 20,4% | 14,4% | 26,9% | 1 |
| 2017 | 8 782 | 24,2% | 15,8% | 31,0% | 1 |
| 2016 | 7 642 | 19,4% | 19,1% | 27,7% | 2 |
| 2015 | 3 928 | 26,2% | 23,2% | 37,0% | 2 |
| 2014 | 3 539 | 28,4% | 26,3% | 39,1% | 0 |
| 2013 | 3 451 | 31,1% | 28,1% | 41,1% | 2 |
| 2012 | 3 311 | 36,8% | 31,0% | 46,5% | 3 |
| 2011 | 3 924 | 35,5% | 33,8% | 43,9% | 3 |
| 2010 | 1 865 | 34,8% | 34,5% | 44,5% | 3 |
| 2009 | 1 736 | 36,6% | 34,8% | 45,4% | 3 |
| 2008 | 1 740 | 36,4% | 36,1% | 46,2% | 2 |
| 2007 | 2 201 | 37,6% | 35,0% | 45,7% | 2 |
| 2006 | 1 849 | 36,7% | 36,9% | 44,5% | 2 |
| 2005 | 1 256 | 36,7% | 34,9% | 46,2% | 2 |
| 2004 | 744 | 35,8% | 34,6% | 42,5% | 2 |
Ce qui lâche selon le kilométrage
Part des contrôles échoués sur chaque organe. Les pièces d’usure (ampoules, pneus, essuie-glaces, plaques) n’entrent pas dans l’indice de fiabilité.
(…) = Médiane de la catégorie, même âge et kilométrage
Liste de contrôle pour le garagiste avant l’achat
Établie à partir des organes où ce modèle échoue plus que sa catégorie à partir de 100 000 km, et des rappels ouverts.
- Direction : jeu de la crémaillère, des biellettes et rotules, fuites d’assistance et bruits en braquage complet.
- Moteur et échappement : fuites d’huile et de liquide de refroidissement, fuites et corrosion de l’échappement, voyants ; en diesel, état du FAP/EGR et fumées.
- Rappels : 5 rappel(s) grave(s) concernent ce modèle — demandez la preuve des travaux
- A12/0089/19 · 2004–2012 · A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is…
- A12/1451/17 · 2004–2012 · null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the…
- A12/1685/16 · 2009–2012 · null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
- A12/0717/15 · · null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the…
- A12/1827/13 · 2013 · null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may…
Vérifiez une voiture précise par son VIN sur les sites officiels : NHTSA (US) · DVSA (UK)
Rappels officiels
Rappels publiés par la NHTSA (États-Unis) et l’EU Safety Gate qui citent ce modèle. Vérifiez par VIN si une voiture précise est concernée.
The child lock on the rear doors could be defective.As a result, it might be possible to open the door even when the child lock is activated, increasing the risk of an accident.
A12/01207/20 ↗A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause injury to the occupants of the vehicle.
A12/0089/19 ↗null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the vehicle cabin causing injuries to the occupants.
A12/1451/17 ↗null The upper brake light on the hardtop may not light up when the engine is starting and the vehicle is about to move off.
A12/1765/16 ↗null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
A12/1685/16 ↗null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create…
A12/0717/15 ↗Texte complet
null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create excessive pressure and may result in separation of the airbag housing.
Afficher 3 rappels de plus
null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may potentially affect restraint performance.
A12/1827/13 ↗null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking…
A12/1551/13 ↗Texte complet
null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking of the vehicle.
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag…
A12/0479/13 ↗Texte complet
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag housing.