Pick-ups
Nissan Navara: Zuverlässigkeit
Bei 73.320 britischen MOT-Prüfungen fielen 23,7% der Nissan Navara wegen eines technischen oder Karosseriemangels durch. Median eines Pick-ups gleichen Alters und gleicher Laufleistung: 20,8%.
- Beste Baujahre
- —
- Baujahre mit den meisten Mängeln
- 2017, 2018, 2019
- Schwachstelle bei hoher Laufleistung
- Lenkung, Motor, Abgasanlage und Emissionen
- Amtliche Rückrufe
- 9 Rückrufe, davon 6 ernst
- Technische Mängelquote
- 23,7%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 20,8%
- MOT-Prüfungen
- 73.320
- Beschwerden von US-Haltern
- 0
MOT-Ergebnisse nach Prüfjahr
Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.
| Prüfjahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel |
|---|---|---|---|---|
| 2024 | 73.320 | 23,7% | 20,8% | 31,9% |
| 2023 | 71.282 | 24,2% | 21,6% | 32,8% |
Mängelquote nach Jahr der Erstzulassung
Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.
| Jahr | Prüfungen | Technische Mängel | Klassenmedian | Alle Mängel | Rückrufe |
|---|---|---|---|---|---|
| 2021 | 7.049 | 7,6% | 7,6% | 15,5% | 0 |
| 2020 | 4.452 | 11,9% | 10,5% | 19,7% | 0 |
| 2019 | 7.480 | 14,7% | 12,0% | 21,6% | 0 |
| 2018 | 7.923 | 20,4% | 14,4% | 26,9% | 1 |
| 2017 | 8.782 | 24,2% | 15,8% | 31,0% | 1 |
| 2016 | 7.642 | 19,4% | 19,1% | 27,7% | 2 |
| 2015 | 3.928 | 26,2% | 23,2% | 37,0% | 2 |
| 2014 | 3.539 | 28,4% | 26,3% | 39,1% | 0 |
| 2013 | 3.451 | 31,1% | 28,1% | 41,1% | 2 |
| 2012 | 3.311 | 36,8% | 31,0% | 46,5% | 3 |
| 2011 | 3.924 | 35,5% | 33,8% | 43,9% | 3 |
| 2010 | 1.865 | 34,8% | 34,5% | 44,5% | 3 |
| 2009 | 1.736 | 36,6% | 34,8% | 45,4% | 3 |
| 2008 | 1.740 | 36,4% | 36,1% | 46,2% | 2 |
| 2007 | 2.201 | 37,6% | 35,0% | 45,7% | 2 |
| 2006 | 1.849 | 36,7% | 36,9% | 44,5% | 2 |
| 2005 | 1.256 | 36,7% | 34,9% | 46,2% | 2 |
| 2004 | 744 | 35,8% | 34,6% | 42,5% | 2 |
Was nach Laufleistung ausfällt
Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.
(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung
Checkliste für die Werkstatt vor dem Kauf
Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.
- Lenkung: Spiel in Lenkgetriebe, Spurstangen und -köpfen, Undichtigkeiten der Servolenkung und Geräusche bei Volleinschlag prüfen.
- Motor und Abgas: auf Öl- und Kühlmittelverlust, undichte oder rostige Abgasanlage und Warnleuchten achten; beim Diesel DPF/AGR und Rauch prüfen.
- Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
- A12/0089/19 · 2004–2012 · A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is…
- A12/1451/17 · 2004–2012 · null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the…
- A12/1685/16 · 2009–2012 · null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
- A12/0717/15 · · null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the…
- A12/1827/13 · 2013 · null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may…
Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
The child lock on the rear doors could be defective.As a result, it might be possible to open the door even when the child lock is activated, increasing the risk of an accident.
A12/01207/20 ↗A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause injury to the occupants of the vehicle.
A12/0089/19 ↗null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the vehicle cabin causing injuries to the occupants.
A12/1451/17 ↗null The upper brake light on the hardtop may not light up when the engine is starting and the vehicle is about to move off.
A12/1765/16 ↗null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
A12/1685/16 ↗null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create…
A12/0717/15 ↗Volltext
null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create excessive pressure and may result in separation of the airbag housing.
3 weitere Rückrufe anzeigen
null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may potentially affect restraint performance.
A12/1827/13 ↗null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking…
A12/1551/13 ↗Volltext
null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking of the vehicle.
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag…
A12/0479/13 ↗Volltext
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag housing.