Pick-ups
Fiabilidad del Nissan Navara
En 73.320 inspecciones MOT británicas, el 23,7 % de los Nissan Navara no pasó por un defecto mecánico o estructural. La mediana de un pick-up con la misma edad y kilometraje: 20,8 %.
- Mejores años
- —
- Años con más fallos
- 2017, 2018, 2019
- Punto débil con kilometraje alto
- Dirección, Motor, escape y emisiones
- Llamadas a revisión oficiales
- 9 llamadas a revisión, 6 graves
- Tasa de fallo mecánico
- 23,7%
- Mediana de la clase, misma edad y kilometraje
- 20,8%
- inspecciones MOT
- 73.320
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 73.320 | 23,7% | 20,8% | 31,9% |
| 2023 | 71.282 | 24,2% | 21,6% | 32,8% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2021 | 7049 | 7,6% | 7,6% | 15,5% | 0 |
| 2020 | 4452 | 11,9% | 10,5% | 19,7% | 0 |
| 2019 | 7480 | 14,7% | 12,0% | 21,6% | 0 |
| 2018 | 7923 | 20,4% | 14,4% | 26,9% | 1 |
| 2017 | 8782 | 24,2% | 15,8% | 31,0% | 1 |
| 2016 | 7642 | 19,4% | 19,1% | 27,7% | 2 |
| 2015 | 3928 | 26,2% | 23,2% | 37,0% | 2 |
| 2014 | 3539 | 28,4% | 26,3% | 39,1% | 0 |
| 2013 | 3451 | 31,1% | 28,1% | 41,1% | 2 |
| 2012 | 3311 | 36,8% | 31,0% | 46,5% | 3 |
| 2011 | 3924 | 35,5% | 33,8% | 43,9% | 3 |
| 2010 | 1865 | 34,8% | 34,5% | 44,5% | 3 |
| 2009 | 1736 | 36,6% | 34,8% | 45,4% | 3 |
| 2008 | 1740 | 36,4% | 36,1% | 46,2% | 2 |
| 2007 | 2201 | 37,6% | 35,0% | 45,7% | 2 |
| 2006 | 1849 | 36,7% | 36,9% | 44,5% | 2 |
| 2005 | 1256 | 36,7% | 34,9% | 46,2% | 2 |
| 2004 | 744 | 35,8% | 34,6% | 42,5% | 2 |
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Dirección: holgura de cremallera, bieletas y rótulas, fugas de la asistencia y ruidos con el volante a tope.
- Motor y escape: fugas de aceite y refrigerante, fugas y corrosión del escape, testigos; en diésel, estado del FAP/EGR y humos.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- A12/0089/19 · 2004–2012 · A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is…
- A12/1451/17 · 2004–2012 · null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the…
- A12/1685/16 · 2009–2012 · null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
- A12/0717/15 · · null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the…
- A12/1827/13 · 2013 · null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The child lock on the rear doors could be defective.As a result, it might be possible to open the door even when the child lock is activated, increasing the risk of an accident.
A12/01207/20 ↗A defect in the gas generator of the passenger airbag causes uncontrolled inflation and the release of metal fragments when the airbag is activated. This can cause injury to the occupants of the vehicle.
A12/0089/19 ↗null In the event of deployment of the passenger airbag, the inflator body of the airbag could shatter and release metal fragments into the vehicle cabin causing injuries to the occupants.
A12/1451/17 ↗null The upper brake light on the hardtop may not light up when the engine is starting and the vehicle is about to move off.
A12/1765/16 ↗null In the event of the passenger airbag being deployed, the casing of the inflator may burst causing injuries to the passengers.
A12/1685/16 ↗null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create…
A12/0717/15 ↗Texto completo
null A potential air leak on some passenger airbag inflators may allow moisture to enter the airbag inflator causing the propellant in the inflator units to deteriorate. Deterioration of the propellant may create excessive pressure and may result in separation of the airbag housing.
Mostrar 3 llamadas más
null The left hand side and the right hand side seat belts may have been swapped. This incorrect installation of the seat belts may potentially affect restraint performance.
A12/1827/13 ↗null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking…
A12/1551/13 ↗Texto completo
null The front suspension lower ball joint may disconnect from the lower link under some driving conditions, such as when driving over potholes or kerb-stones, potentially affecting the steering control and the braking of the vehicle.
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag…
A12/0479/13 ↗Texto completo
null The front passenger airbag inflators may have been manufactured out of specification. This could create excessive pressure within the inflator during airbag deployment and may result in separation of the airbag housing.