AutoDefects
Español

Monovolúmenes

Fiabilidad del Volkswagen Touran

En 73.422 inspecciones MOT británicas, el 22,5 % de los Volkswagen Touran no pasó por un defecto mecánico o estructural. La mediana de un monovolumen con la misma edad y kilometraje: 26,8 %.

84de 100Fiabilidad alta16 % menos fallos mecánicos que su clase
Mejores años
2016, 2017, 2020
Años con más fallos
—
Punto débil con kilometraje alto
Suspensión y ruedas
Llamadas a revisión oficiales
15 llamadas a revisión, 5 graves
Tasa de fallo mecánico
22,5%
Mediana de la clase, misma edad y kilometraje
26,8%
Primera inspección (3 años), 2021
5,0% (6,7%)
inspecciones MOT
73.422
Quejas en EE. UU.
0

Resultados MOT por año de inspección

Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.

Año de inspecciónInspeccionesFallo mecánicoMediana de la claseCualquier fallo
202473.42222,5%26,8%32,2%
202378.27923,1%26,9%33,2%

Tasa de fallo por año de primera matriculación

Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.

Este modeloMediana de la clase
0%16%31%2004: 37,8%2004 Mediana de la clase: 42,9%042005: 37,8%2005 Mediana de la clase: 41,6%052006: 38,3%2006 Mediana de la clase: 41,5%062007: 33,0%2007 Mediana de la clase: 40,5%072008: 34,2%2008 Mediana de la clase: 39,6%082009: 32,7%2009 Mediana de la clase: 38,4%092010: 31,6%2010 Mediana de la clase: 33,2%102011: 23,1%2011 Mediana de la clase: 29,1%112012: 21,5%2012 Mediana de la clase: 26,1%122013: 18,9%2013 Mediana de la clase: 24,3%132014: 16,1%2014 Mediana de la clase: 21,5%142015: 15,1%2015 Mediana de la clase: 16,4%152016: 8,7%2016 Mediana de la clase: 13,2%162017: 7,8%2017 Mediana de la clase: 11,9%172018: 8,7%2018 Mediana de la clase: 9,8%182019: 5,6%2019 Mediana de la clase: 6,7%192020: 4,3%2020 Mediana de la clase: 6,2%202021: 5,0%2021 Mediana de la clase: 6,7%21
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
202110415,0%6,7%11,9%1
202022604,3%6,2%12,5%2
201928235,6%6,7%13,9%3
201837468,7%9,8%18,5%3
201742907,8%11,9%18,7%3
201636348,7%13,2%18,6%4
2015382015,1%16,4%25,8%3
2014491816,1%21,5%26,8%2
2013539218,9%24,3%28,8%4
2012569021,5%26,1%31,4%2
2011595323,1%29,1%33,4%2
2010496831,6%33,2%41,0%3
2009533132,7%38,4%42,6%3
2008503034,2%39,6%43,9%3
2007561133,0%40,5%42,3%3
2006394638,3%41,5%47,5%3
2005284037,8%41,6%46,9%3
2004184237,8%42,9%47,7%0
Años anteriores (1)
AñoInspeccionesFallo mecánicoMediana de la claseCualquier falloLlamadas
200324335,8%42,0%42,0%0

Fallos más frecuentes en la inspección

Los defectos que los inspectores registraron con más frecuencia en este modelo, con la redacción original de la DVSA (en inglés), por cada 1.000 inspecciones.

Defecto (redacción DVSA)SistemaPor 1.000 inspecciones
Condition: has ply or cords exposedNeumáticos (desgaste)48,7
Pins and bushes: pin or bush excessively wornSuspensión y ruedas46,5
tread depth below requirements of 1.6mmNeumáticos (desgaste)46
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtSuspensión y ruedas42,6
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtCarrocería, bastidor y corrosión39,8
Coil spring: fractured or brokenSuspensión y ruedas38,6
Stop lamp: not workingLuces y electricidad (desgaste)27,2
Brake pads: less than 1.5 mm thickFrenos26,5
Position lamp: not workingLuces y electricidad (desgaste)22,3
Wipers: does not clear the windscreen effectivelyEscobillas y parabrisas (desgaste)20,9
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsNeumáticos (desgaste)20,5
Linkage ball joints: ball joint excessively wornSuspensión y ruedas18,9
Washers: provides insufficient washer liquidEscobillas y parabrisas (desgaste)18,1
Shock absorbers: has a serious fluid leakSuspensión y ruedas17,5
Headlamp aim: too lowLuces y electricidad (desgaste)16,4

Qué falla según el kilometraje

Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.

Sistema0-50k km50-100k km100-150k km150k+ km
Fallo mecánico3,3% (4,9)9,4% (11,7)17,1% (21,1)30,1% (35,4)
Inspecciones412312.43314.69742.169
Suspensión y ruedas0,9% (1,5)3,6% (4,4)9,5% (10,3)19,4% (17,1)
Frenos1,6% (2,1)3,8% (5,3)5,4% (8,3)9,9% (12,7)
Motor, escape y emisiones0,4% (0,9)1,7% (1,4)2,9% (2,9)5,7% (5,6)
Dirección0,0% (0,2)0,2% (0,6)0,5% (2,0)2,4% (4,5)
Carrocería, bastidor y corrosión0,2% (0,4)0,8% (1,6)2,2% (3,8)7,0% (7,0)
Cinturones y airbags0,3% (0,3)0,6% (0,6)0,7% (0,9)2,9% (1,7)
Luces y electricidad (desgaste)2,5% (3,3)4,2% (7,9)7,1% (14,3)13,3% (22,0)
Neumáticos (desgaste)4,8% (4,4)6,4% (6,0)8,6% (8,2)10,2% (10,0)
Escobillas y parabrisas (desgaste)1,2% (3,4)2,5% (3,9)3,2% (4,7)5,3% (6,0)
Otros y matrículas (desgaste)0,1% (0,1)0,2% (0,2)0,3% (0,3)0,6% (0,5)

(…) = Mediana de la clase, misma edad y kilometraje

Lista de comprobación para el mecánico antes de comprar

Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.

  1. Suspensión y ruedas: revisar brazos, silentblocks, rótulas, muelles y amortiguadores (holguras, grietas, fugas); buscar desgaste irregular de neumáticos.
  2. Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
    • SR/02935/26 · 2013–2024 · Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering…
    • A12/00140/20 · 2019 · The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of…
    • A12/1535/18 · 2015–2018 · Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this…
    • A12/0387/17 · 2016, 2017 · null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or…
    • A12/1493/15 · 2013 · null The airbag may deploy incorrectly as a result of defective welding of the gas generator.

    Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2013–2024

    Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.

    SR/02935/26 ↗
  • EU Safety Gate2023, 2024

    Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an…

    Texto completo

    Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an accident. This increases the risk of injury.

    SR/01580/25 ↗
  • EU Safety Gate2023

    Two rear left wheel bearing housings may be defective. They can fail and affect the stability of the vehicle, increasing the risk of an accident.

    A12/01677/23 ↗
  • EU Safety Gate2005–2015

    The thickness of the gas tank walls could be reduced to below the requirements, by corrosion. Gas tanks may burst, increasing the risk of injury.

    A12/00816/22 ↗
  • EU Safety Gate2020

    Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be…

    Texto completo

    Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be impaired, increasing the risk of an accident.

    A12/00262/21 ↗
  • EU Safety Gate2019

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…

    Texto completo

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.

    A12/00220/21 ↗
Mostrar 9 llamadas más
  • EU Safety GateGrave2019

    The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of fire or explosion.

    A12/00140/20 ↗
  • EU Safety GateGrave2015–2018

    Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this happens, there is a risk of fire.

    A12/1535/18 ↗
  • EU Safety Gate2018

    The fastening of the active headrest may be defective. In the event of an accident, the headrest may become detached from the back of the seat, increasing the risk of injury to the person occupying the seat.

    A12/0774/18 ↗
  • EU Safety GateGrave2016, 2017

    null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or seat-belt pre-tensioner not activating in the event of an accident.

    A12/0387/17 ↗
  • EU Safety Gate2010–2013

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period…

    Texto completo

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period of time, the residual wall thickness of the gas tank could become too low and the gas tank could burst.

    A12/0300/17 ↗
  • EU Safety Gate2016

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the…

    Texto completo

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the winter tyres were fitted which could have a negative effect on driving stability.

    A12/0256/17 ↗
  • EU Safety Gate2005–2009

    null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.

    A12/1311/16 ↗
  • EU Safety Gate2005–2010

    null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.

    A12/1312/16 ↗
  • EU Safety GateGrave2013

    null The airbag may deploy incorrectly as a result of defective welding of the gas generator.

    A12/1493/15 ↗