AutoDefects
Deutsch

Vans

Volkswagen Touran: Zuverlässigkeit

Bei 73.422 britischen MOT-Prüfungen fielen 22,5% der Volkswagen Touran wegen eines technischen oder Karosseriemangels durch. Median eines Vans gleichen Alters und gleicher Laufleistung: 26,8%.

84von 100Hohe Zuverlässigkeit16% weniger technische Mängel als die Klasse
Beste Baujahre
2016, 2017, 2020
Baujahre mit den meisten Mängeln
—
Schwachstelle bei hoher Laufleistung
Fahrwerk und Räder
Amtliche Rückrufe
15 Rückrufe, davon 5 ernst
Technische Mängelquote
22,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
26,8%
Erste Prüfung (3 Jahre), 2021
5,0% (6,7%)
MOT-Prüfungen
73.422
Beschwerden von US-Haltern
0

MOT-Ergebnisse nach Prüfjahr

Alle Fahrzeuge dieses Modells bei der Prüfung des jeweiligen Jahres im Vergleich mit der Klasse bei gleichem Alter und gleicher Laufleistung. Zeigt, ob das Modell mit dem Alter mithält.

PrüfjahrPrüfungenTechnische MängelKlassenmedianAlle Mängel
202473.42222,5%26,8%32,2%
202378.27923,1%26,9%33,2%

Mängelquote nach Jahr der Erstzulassung

Technische Mängelquote bei der MOT-Prüfung 2024 nach Jahr der Erstzulassung, verglichen mit dem Klassenmedian bei gleichem Alter und gleicher Laufleistung.

Dieses ModellKlassenmedian
0%16%31%2004: 37,8%2004 Klassenmedian: 42,9%042005: 37,8%2005 Klassenmedian: 41,6%052006: 38,3%2006 Klassenmedian: 41,5%062007: 33,0%2007 Klassenmedian: 40,5%072008: 34,2%2008 Klassenmedian: 39,6%082009: 32,7%2009 Klassenmedian: 38,4%092010: 31,6%2010 Klassenmedian: 33,2%102011: 23,1%2011 Klassenmedian: 29,1%112012: 21,5%2012 Klassenmedian: 26,1%122013: 18,9%2013 Klassenmedian: 24,3%132014: 16,1%2014 Klassenmedian: 21,5%142015: 15,1%2015 Klassenmedian: 16,4%152016: 8,7%2016 Klassenmedian: 13,2%162017: 7,8%2017 Klassenmedian: 11,9%172018: 8,7%2018 Klassenmedian: 9,8%182019: 5,6%2019 Klassenmedian: 6,7%192020: 4,3%2020 Klassenmedian: 6,2%202021: 5,0%2021 Klassenmedian: 6,7%21
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
20211.0415,0%6,7%11,9%1
20202.2604,3%6,2%12,5%2
20192.8235,6%6,7%13,9%3
20183.7468,7%9,8%18,5%3
20174.2907,8%11,9%18,7%3
20163.6348,7%13,2%18,6%4
20153.82015,1%16,4%25,8%3
20144.91816,1%21,5%26,8%2
20135.39218,9%24,3%28,8%4
20125.69021,5%26,1%31,4%2
20115.95323,1%29,1%33,4%2
20104.96831,6%33,2%41,0%3
20095.33132,7%38,4%42,6%3
20085.03034,2%39,6%43,9%3
20075.61133,0%40,5%42,3%3
20063.94638,3%41,5%47,5%3
20052.84037,8%41,6%46,9%3
20041.84237,8%42,9%47,7%0
Ältere Baujahre (1)
JahrPrüfungenTechnische MängelKlassenmedianAlle MängelRückrufe
200324335,8%42,0%42,0%0

Häufigste Mängel bei der Prüfung

Die Mängel, die Prüfer bei diesem Modell am häufigsten festgestellt haben, im Originalwortlaut der DVSA (Englisch), je 1.000 Prüfungen.

Mangel (DVSA-Wortlaut)BaugruppeJe 1.000 Prüfungen
Condition: has ply or cords exposedReifen (Verschleiß)48,7
Pins and bushes: pin or bush excessively wornFahrwerk und Räder46,5
tread depth below requirements of 1.6mmReifen (Verschleiß)46
Linkage ball joint dust cover: ball joint dust cover no longer prevents the ingress of dirtFahrwerk und Räder42,6
Joints: constant velocity boot split or insecure, no longer prevents the ingress of dirtKarosserie, Rahmen und Rost39,8
Coil spring: fractured or brokenFahrwerk und Räder38,6
Stop lamp: not workingLicht und Elektrik (Verschleiß)27,2
Brake pads: less than 1.5 mm thickBremsen26,5
Position lamp: not workingLicht und Elektrik (Verschleiß)22,3
Wipers: does not clear the windscreen effectivelyWischer und Scheibe (Verschleiß)20,9
Condition: has a cut in excess of the requirements deep enough to reach the ply or cordsReifen (Verschleiß)20,5
Linkage ball joints: ball joint excessively wornFahrwerk und Räder18,9
Washers: provides insufficient washer liquidWischer und Scheibe (Verschleiß)18,1
Shock absorbers: has a serious fluid leakFahrwerk und Räder17,5
Headlamp aim: too lowLicht und Elektrik (Verschleiß)16,4

Was nach Laufleistung ausfällt

Anteil der Prüfungen, die an der jeweiligen Baugruppe scheiterten. Verschleißteile (Lampen, Reifen, Wischer, Kennzeichen) zählen nicht zum Zuverlässigkeitswert.

Baugruppe0-50k km50-100k km100-150k km150k+ km
Technische Mängel3,3% (4,9)9,4% (11,7)17,1% (21,1)30,1% (35,4)
Prüfungen4.12312.43314.69742.169
Fahrwerk und Räder0,9% (1,5)3,6% (4,4)9,5% (10,3)19,4% (17,1)
Bremsen1,6% (2,1)3,8% (5,3)5,4% (8,3)9,9% (12,7)
Motor, Abgasanlage und Emissionen0,4% (0,9)1,7% (1,4)2,9% (2,9)5,7% (5,6)
Lenkung0,0% (0,2)0,2% (0,6)0,5% (2,0)2,4% (4,5)
Karosserie, Rahmen und Rost0,2% (0,4)0,8% (1,6)2,2% (3,8)7,0% (7,0)
Gurte und Airbags0,3% (0,3)0,6% (0,6)0,7% (0,9)2,9% (1,7)
Licht und Elektrik (Verschleiß)2,5% (3,3)4,2% (7,9)7,1% (14,3)13,3% (22,0)
Reifen (Verschleiß)4,8% (4,4)6,4% (6,0)8,6% (8,2)10,2% (10,0)
Wischer und Scheibe (Verschleiß)1,2% (3,4)2,5% (3,9)3,2% (4,7)5,3% (6,0)
Sonstiges und Kennzeichen (Verschleiß)0,1% (0,1)0,2% (0,2)0,3% (0,3)0,6% (0,5)

(…) = Klassenmedian, gleiches Alter und gleiche Laufleistung

Checkliste für die Werkstatt vor dem Kauf

Abgeleitet aus den Baugruppen, bei denen dieses Modell ab 100.000 km häufiger durchfällt als seine Klasse, und aus offenen Rückrufen.

  1. Fahrwerk und Räder: Querlenker, Buchsen, Traggelenke, Federn und Stoßdämpfer auf Spiel, Risse und Undichtigkeiten prüfen; auf ungleichmäßigen Reifenverschleiß achten.
  2. Rückrufe: 5 ernste Rückrufe betreffen dieses Modell – lassen Sie sich die Erledigung nachweisen
    • SR/02935/26 · 2013–2024 · Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering…
    • A12/00140/20 · 2019 · The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of…
    • A12/1535/18 · 2015–2018 · Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this…
    • A12/0387/17 · 2016, 2017 · null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or…
    • A12/1493/15 · 2013 · null The airbag may deploy incorrectly as a result of defective welding of the gas generator.

    Ein bestimmtes Auto per FIN auf den offiziellen Seiten prüfen: NHTSA (US) · DVSA (UK)

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2013–2024

    Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.

    SR/02935/26 ↗
  • EU Safety Gate2023, 2024

    Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an…

    Volltext

    Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an accident. This increases the risk of injury.

    SR/01580/25 ↗
  • EU Safety Gate2023

    Two rear left wheel bearing housings may be defective. They can fail and affect the stability of the vehicle, increasing the risk of an accident.

    A12/01677/23 ↗
  • EU Safety Gate2005–2015

    The thickness of the gas tank walls could be reduced to below the requirements, by corrosion. Gas tanks may burst, increasing the risk of injury.

    A12/00816/22 ↗
  • EU Safety Gate2020

    Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be…

    Volltext

    Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be impaired, increasing the risk of an accident.

    A12/00262/21 ↗
  • EU Safety Gate2019

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…

    Volltext

    Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.

    A12/00220/21 ↗
9 weitere Rückrufe anzeigen
  • EU Safety GateErnst2019

    The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of fire or explosion.

    A12/00140/20 ↗
  • EU Safety GateErnst2015–2018

    Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this happens, there is a risk of fire.

    A12/1535/18 ↗
  • EU Safety Gate2018

    The fastening of the active headrest may be defective. In the event of an accident, the headrest may become detached from the back of the seat, increasing the risk of injury to the person occupying the seat.

    A12/0774/18 ↗
  • EU Safety GateErnst2016, 2017

    null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or seat-belt pre-tensioner not activating in the event of an accident.

    A12/0387/17 ↗
  • EU Safety Gate2010–2013

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period…

    Volltext

    null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period of time, the residual wall thickness of the gas tank could become too low and the gas tank could burst.

    A12/0300/17 ↗
  • EU Safety Gate2016

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the…

    Volltext

    null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the winter tyres were fitted which could have a negative effect on driving stability.

    A12/0256/17 ↗
  • EU Safety Gate2005–2009

    null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.

    A12/1311/16 ↗
  • EU Safety Gate2005–2010

    null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.

    A12/1312/16 ↗
  • EU Safety GateErnst2013

    null The airbag may deploy incorrectly as a result of defective welding of the gas generator.

    A12/1493/15 ↗