Надійність Volkswagen Touran
За 73 422 британськими техоглядами MOT 22,5% автомобілів Volkswagen Touran не пройшли через механічний або кузовний дефект. Медіана для мінівена того ж віку й пробігу: 26,8%.
- Найкращі роки
- 2016, 2017, 2020
- Роки з найбільшою кількістю відмов
- —
- Слабке місце на великому пробігу
- Підвіска й колеса
- Офіційні відкликання
- 15 відкликань, серйозних: 5
- Відмови через механіку
- 22,5%
- Медіана класу, той самий вік і пробіг
- 26,8%
- Перший техогляд (3 роки), 2021
- 5,0% (6,7%)
- техоглядів MOT
- 73 422
- Скарги власників у США
- 0
Результати техоглядів за роками
Уся флотилія цієї моделі на техоглядах кожного року порівняно з класом того ж віку й пробігу. Видно, чи тримає модель позицію з віком.
| Рік техогляду | Техогляди | Механічні відмови | Медіана класу | Усі відмови |
|---|---|---|---|---|
| 2024 | 73 422 | 22,5% | 26,8% | 32,2% |
| 2023 | 78 279 | 23,1% | 26,9% | 33,2% |
Відсоток відмов за роком першої реєстрації
Частка механічних відмов на техогляді 2024 року за роком першої реєстрації авто порівняно з медіаною класу того ж віку й пробігу.
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2021 | 1 041 | 5,0% | 6,7% | 11,9% | 1 |
| 2020 | 2 260 | 4,3% | 6,2% | 12,5% | 2 |
| 2019 | 2 823 | 5,6% | 6,7% | 13,9% | 3 |
| 2018 | 3 746 | 8,7% | 9,8% | 18,5% | 3 |
| 2017 | 4 290 | 7,8% | 11,9% | 18,7% | 3 |
| 2016 | 3 634 | 8,7% | 13,2% | 18,6% | 4 |
| 2015 | 3 820 | 15,1% | 16,4% | 25,8% | 3 |
| 2014 | 4 918 | 16,1% | 21,5% | 26,8% | 2 |
| 2013 | 5 392 | 18,9% | 24,3% | 28,8% | 4 |
| 2012 | 5 690 | 21,5% | 26,1% | 31,4% | 2 |
| 2011 | 5 953 | 23,1% | 29,1% | 33,4% | 2 |
| 2010 | 4 968 | 31,6% | 33,2% | 41,0% | 3 |
| 2009 | 5 331 | 32,7% | 38,4% | 42,6% | 3 |
| 2008 | 5 030 | 34,2% | 39,6% | 43,9% | 3 |
| 2007 | 5 611 | 33,0% | 40,5% | 42,3% | 3 |
| 2006 | 3 946 | 38,3% | 41,5% | 47,5% | 3 |
| 2005 | 2 840 | 37,8% | 41,6% | 46,9% | 3 |
| 2004 | 1 842 | 37,8% | 42,9% | 47,7% | 0 |
Старші роки (1)
| Рік | Техогляди | Механічні відмови | Медіана класу | Усі відмови | Відкликання |
|---|---|---|---|---|---|
| 2003 | 243 | 35,8% | 42,0% | 42,0% | 0 |
Найчастіші причини відмов на техогляді
Дефекти, які інспектори найчастіше фіксували на цій моделі, дослівно мовою DVSA (англійською), на 1 000 техоглядів.
Що ламається залежно від пробігу
Частка техоглядів, не пройдених через кожну систему. Витратні елементи (лампи, шини, щітки, номери) не враховуються в індексі надійності.
(…) = Медіана класу, той самий вік і пробіг
Чекліст для СТО перед купівлею
Складено із систем, де ця модель ламається частіше за свій клас при пробігу від 100 000 км, і з відкритих відкликань.
- Підвіска й колеса: перевірте важелі, сайлентблоки, кульові опори, пружини й амортизатори на люфти, тріщини й підтікання; подивіться на нерівномірний знос шин.
- Відкликання: серйозних відкликань для моделі — 5. Попросіть підтвердження, що роботи виконано
- SR/02935/26 · 2013–2024 · Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering…
- A12/00140/20 · 2019 · The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of…
- A12/1535/18 · 2015–2018 · Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this…
- A12/0387/17 · 2016, 2017 · null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or…
- A12/1493/15 · 2013 · null The airbag may deploy incorrectly as a result of defective welding of the gas generator.
Перевірте конкретне авто за VIN на офіційних сайтах: NHTSA (US) · DVSA (UK)
Офіційні відкликання
Відкликання, опубліковані NHTSA (США) та EU Safety Gate, у яких названо цю модель. Чи стосується це конкретного авто, перевіряйте за VIN.
Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.
SR/02935/26 ↗Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an…
SR/01580/25 ↗Повний текст
Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an accident. This increases the risk of injury.
Two rear left wheel bearing housings may be defective. They can fail and affect the stability of the vehicle, increasing the risk of an accident.
A12/01677/23 ↗The thickness of the gas tank walls could be reduced to below the requirements, by corrosion. Gas tanks may burst, increasing the risk of injury.
A12/00816/22 ↗Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be…
A12/00262/21 ↗Повний текст
Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be impaired, increasing the risk of an accident.
Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…
A12/00220/21 ↗Повний текст
Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.
Показати ще 9 відкликань
The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of fire or explosion.
A12/00140/20 ↗Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this happens, there is a risk of fire.
A12/1535/18 ↗The fastening of the active headrest may be defective. In the event of an accident, the headrest may become detached from the back of the seat, increasing the risk of injury to the person occupying the seat.
A12/0774/18 ↗null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or seat-belt pre-tensioner not activating in the event of an accident.
A12/0387/17 ↗null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period…
A12/0300/17 ↗Повний текст
null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period of time, the residual wall thickness of the gas tank could become too low and the gas tank could burst.
null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the…
A12/0256/17 ↗Повний текст
null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the winter tyres were fitted which could have a negative effect on driving stability.
null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.
A12/1311/16 ↗null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.
A12/1312/16 ↗null The airbag may deploy incorrectly as a result of defective welding of the gas generator.
A12/1493/15 ↗