Volkswagen Touran — niezawodność
W 73 422 brytyjskich badaniach MOT 22,5% egzemplarzy Volkswagen Touran nie przeszło z powodu usterki mechanicznej lub nadwozia. Mediana dla minivana w tym samym wieku i z tym samym przebiegiem: 26,8%.
- Najlepsze roczniki
- 2016, 2017, 2020
- Roczniki z największą liczbą usterek
- —
- Słaby punkt przy dużym przebiegu
- Zawieszenie i koła
- Oficjalne akcje przywoławcze
- 15 akcji, poważnych: 5
- Usterki mechaniczne
- 22,5%
- Mediana klasy, ten sam wiek i przebieg
- 26,8%
- Pierwsze badanie (3 lata), 2021
- 5,0% (6,7%)
- badań MOT
- 73 422
- Skargi właścicieli w USA
- 0
Wyniki badań według roku
Wszystkie egzemplarze modelu na badaniach w danym roku wobec klasy w tym samym wieku i z tym samym przebiegiem. Widać, czy model utrzymuje pozycję z wiekiem.
| Rok badania | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki |
|---|---|---|---|---|
| 2024 | 73 422 | 22,5% | 26,8% | 32,2% |
| 2023 | 78 279 | 23,1% | 26,9% | 33,2% |
Odsetek usterek według roku pierwszej rejestracji
Odsetek usterek mechanicznych na badaniu MOT w 2024 r. według roku pierwszej rejestracji, wobec mediany klasy w tym samym wieku i z tym samym przebiegiem.
| Rok | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki | Akcje |
|---|---|---|---|---|---|
| 2021 | 1041 | 5,0% | 6,7% | 11,9% | 1 |
| 2020 | 2260 | 4,3% | 6,2% | 12,5% | 2 |
| 2019 | 2823 | 5,6% | 6,7% | 13,9% | 3 |
| 2018 | 3746 | 8,7% | 9,8% | 18,5% | 3 |
| 2017 | 4290 | 7,8% | 11,9% | 18,7% | 3 |
| 2016 | 3634 | 8,7% | 13,2% | 18,6% | 4 |
| 2015 | 3820 | 15,1% | 16,4% | 25,8% | 3 |
| 2014 | 4918 | 16,1% | 21,5% | 26,8% | 2 |
| 2013 | 5392 | 18,9% | 24,3% | 28,8% | 4 |
| 2012 | 5690 | 21,5% | 26,1% | 31,4% | 2 |
| 2011 | 5953 | 23,1% | 29,1% | 33,4% | 2 |
| 2010 | 4968 | 31,6% | 33,2% | 41,0% | 3 |
| 2009 | 5331 | 32,7% | 38,4% | 42,6% | 3 |
| 2008 | 5030 | 34,2% | 39,6% | 43,9% | 3 |
| 2007 | 5611 | 33,0% | 40,5% | 42,3% | 3 |
| 2006 | 3946 | 38,3% | 41,5% | 47,5% | 3 |
| 2005 | 2840 | 37,8% | 41,6% | 46,9% | 3 |
| 2004 | 1842 | 37,8% | 42,9% | 47,7% | 0 |
Starsze roczniki (1)
| Rok | Badania | Usterki mechaniczne | Mediana klasy | Wszystkie usterki | Akcje |
|---|---|---|---|---|---|
| 2003 | 243 | 35,8% | 42,0% | 42,0% | 0 |
Najczęstsze usterki na badaniu
Usterki najczęściej odnotowywane przez diagnostów przy tym modelu, w oryginalnym brzmieniu DVSA (po angielsku), na 1000 badań.
Co się psuje w zależności od przebiegu
Odsetek badań niezaliczonych z powodu danego układu. Elementy eksploatacyjne (żarówki, opony, wycieraczki, tablice) nie wpływają na wskaźnik niezawodności.
(…) = Mediana klasy, ten sam wiek i przebieg
Lista kontrolna dla mechanika przed zakupem
Na podstawie układów, w których ten model psuje się częściej niż jego klasa przy przebiegu od 100 000 km, oraz otwartych akcji przywoławczych.
- Zawieszenie i koła: sprawdź wahacze, tuleje, sworznie, sprężyny i amortyzatory pod kątem luzów, pęknięć i wycieków; zwróć uwagę na nierówne zużycie opon.
- Akcje przywoławcze: poważnych akcji dla modelu — 5. Poproś o potwierdzenie wykonania napraw
- SR/02935/26 · 2013–2024 · Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering…
- A12/00140/20 · 2019 · The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of…
- A12/1535/18 · 2015–2018 · Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this…
- A12/0387/17 · 2016, 2017 · null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or…
- A12/1493/15 · 2013 · null The airbag may deploy incorrectly as a result of defective welding of the gas generator.
Sprawdź konkretne auto po VIN na oficjalnych stronach: NHTSA (US) · DVSA (UK)
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Moisture ingress could lead to corrosion of a steering rack bolt, which may result in a fracture of the bolt and a loss of steering capability, increasing the risk of accidents.
SR/02935/26 ↗Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an…
SR/01580/25 ↗Pełny tekst
Individual bolted connections on the front or rear seating may not have been tightened to the correct torque. Incorrectly fitted bolted connections can affect the seats’ ability to restrain passengers in the event of an accident. This increases the risk of injury.
Two rear left wheel bearing housings may be defective. They can fail and affect the stability of the vehicle, increasing the risk of an accident.
A12/01677/23 ↗The thickness of the gas tank walls could be reduced to below the requirements, by corrosion. Gas tanks may burst, increasing the risk of injury.
A12/00816/22 ↗Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be…
A12/00262/21 ↗Pełny tekst
Due to a manufacturing error, the brake-pedal plate may not have been adequately welded and could become completely detached when the brake pedal is suddenly applied. As a result, the application of the brakes will be impaired, increasing the risk of an accident.
Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading…
A12/00220/21 ↗Pełny tekst
Due to a manufacturing error, the belt-pulley securing ring of the steering system may not be fully engaged. As a result, the securing ring may become detached and subsequently jam with surrounding components, leading to possible locking of the steering system.
Pokaż jeszcze 9 akcji
The fuel tank wall is not sufficiently thick. Consequently, in the event of an accident it could break and leak fuel increasing the risk of fire or explosion.
A12/00140/20 ↗Moisture can reach the LED module of the sunroof's ambient lighting which may cause a short-circuit and a build-up of heat. If this happens, there is a risk of fire.
A12/1535/18 ↗The fastening of the active headrest may be defective. In the event of an accident, the headrest may become detached from the back of the seat, increasing the risk of injury to the person occupying the seat.
A12/0774/18 ↗null Some vehicles have differences in the mixture ratio for the initiating device, which could lead to the driver and passenger airbag or seat-belt pre-tensioner not activating in the event of an accident.
A12/0387/17 ↗null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period…
A12/0300/17 ↗Pełny tekst
null If mechanical damage occurs to the varnish layer of the gas tank, it could lead to the outer shell of the gas tank no longer having the required corrosion protection. With ongoing corrosion over an extended period of time, the residual wall thickness of the gas tank could become too low and the gas tank could burst.
null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the…
A12/0256/17 ↗Pełny tekst
null It is possible that the wheel bolts were not tightened with the correct torque which could result in the loss of the wheel. Also, the running direction of the tyres may not have been taken into account when the winter tyres were fitted which could have a negative effect on driving stability.
null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.
A12/1311/16 ↗null Corrosion on the front gas tank may reduce the thickness of the gas tank wall. Insufficient thickness of the tank wall poses the risk that the gas tank may burst.
A12/1312/16 ↗null The airbag may deploy incorrectly as a result of defective welding of the gas generator.
A12/1493/15 ↗