Monovolúmenes
Fiabilidad del Toyota Verso
En 27.915 inspecciones MOT británicas, el 13,4 % de los Toyota Verso no pasó por un defecto mecánico o estructural. La mediana de un monovolumen con la misma edad y kilometraje: 22,0 %.
- Mejores años
- 2009, 2012, 2017
- Años con más fallos
- —
- Punto débil con kilometraje alto
- Nada destaca frente a su clase
- Llamadas a revisión oficiales
- 29 llamadas a revisión, 10 graves
- Tasa de fallo mecánico
- 13,4%
- Mediana de la clase, misma edad y kilometraje
- 22,0%
- inspecciones MOT
- 27.915
- Quejas en EE. UU.
- 0
Resultados MOT por año de inspección
Toda la flota de este modelo en la inspección de cada año, frente a su clase con la misma edad y kilometraje. Muestra si el modelo mantiene su nivel al envejecer.
| Año de inspección | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo |
|---|---|---|---|---|
| 2024 | 27.915 | 13,4% | 22,0% | 28,7% |
| 2023 | 28.750 | 12,1% | 20,6% | 27,6% |
Tasa de fallo por año de primera matriculación
Tasa de fallo mecánico en la MOT de 2024 según el año de primera matriculación, frente a la mediana de su clase con la misma edad y kilometraje.
| Año | Inspecciones | Fallo mecánico | Mediana de la clase | Cualquier fallo | Llamadas |
|---|---|---|---|---|---|
| 2018 | 844 | 6,4% | 9,4% | 19,1% | 4 |
| 2017 | 2312 | 6,1% | 11,3% | 18,2% | 4 |
| 2016 | 3482 | 9,3% | 12,6% | 21,9% | 5 |
| 2015 | 3183 | 10,0% | 15,5% | 22,5% | 1 |
| 2014 | 2928 | 12,1% | 20,4% | 25,1% | 2 |
| 2013 | 3228 | 13,5% | 23,7% | 30,2% | 2 |
| 2012 | 2939 | 13,9% | 24,6% | 34,0% | 1 |
| 2011 | 3885 | 15,9% | 26,7% | 33,1% | 1 |
| 2010 | 3001 | 21,8% | 32,0% | 38,9% | 1 |
| 2009 | 1911 | 20,3% | 36,7% | 37,7% | 1 |
| 2008 | 85 | 15,3% | 38,9% | 28,2% | 2 |
Qué falla según el kilometraje
Porcentaje de inspecciones suspendidas en cada sistema. Los elementos de desgaste (bombillas, neumáticos, escobillas, matrículas) no cuentan para el índice.
(…) = Mediana de la clase, misma edad y kilometraje
Lista de comprobación para el mecánico antes de comprar
Basada en los sistemas en los que este modelo falla más que su clase a partir de 100.000 km y en las llamadas a revisión abiertas.
- Llamadas a revisión: 5 graves afectan a este modelo; pide prueba de que se hicieron
- SR/01299/25 · 2022, 2023 · Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell…
- A12/01674/22 · 2020–2022 · The fuel tube may become damaged over time and leak, increasing the risk of fire. Moreover, leaking fuel may impair the vehicle's…
- A12/00444/21 · 2015–2018 · Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create…
- A12/1739/18 · 2002–2006 · The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits…
- A12/0162/17 · 2016 · null 1. Incorrect fuel cap seal installation could lead to fuel leakage.2. Incorrect front shock absorber to hub tightening could affect…
Comprueba un coche concreto por su VIN en las webs oficiales: NHTSA (US) · DVSA (UK)
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
A software issue may cause both the multimedia screen and the instrument cluster to turn completely black when the vehicle is started. When this occurs, the displays do not recover. As a result, the driver cannot see…
SR/00018/26 ↗Texto completo
A software issue may cause both the multimedia screen and the instrument cluster to turn completely black when the vehicle is started. When this occurs, the displays do not recover. As a result, the driver cannot see essential driving information such as vehicle speed, fuel level, or warning indicators. Driving without this information increases the risk of an accident.
A software calibration error in the Engine Electronic Control Unit (ECU) causes incorrect IUPR (In-Use Performance Ratio) values, which may delay the malfunction indicator (MIL) warning. As a result, the vehicle could…
SR/04074/25 ↗Texto completo
A software calibration error in the Engine Electronic Control Unit (ECU) causes incorrect IUPR (In-Use Performance Ratio) values, which may delay the malfunction indicator (MIL) warning. As a result, the vehicle could exceed emission limits before the driver is alerted.
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stresses on them. This might cause cracks and a reduced transmission of torque, resulting in the…
SR/03497/25 ↗Texto completo
The rear brake discs do not have sufficient contact with the wheel hub, resulting in an abnormal concentration of stresses on them. This might cause cracks and a reduced transmission of torque, resulting in the loosening of the wheel bolts, an increased risk of a wheel becoming detached from the vehicle, and an increased risk of injuries.
A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…
SR/02983/25 ↗Texto completo
A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…
SR/02942/25 ↗Texto completo
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02656/25 ↗Texto completo
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Mostrar 23 llamadas más
Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell voltage and/or the battery temperature can occur. This can lead the failsafe system…
SR/01299/25 ↗Texto completo
Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell voltage and/or the battery temperature can occur. This can lead the failsafe system to cut the motor power to prevent any damage to the battery, causing a loss of drive. This can increase the risk of accidents and injuries.
The front brake discs may be defective and could become cracked. As a result, the discs could break, increasing the risk of an accident. In addition, the cracked disks can cause noise from the front brakes.
SR/00054/25 ↗Some front and/or rear passenger seat fixations are not strong enough because of a problem on the fixing nuts' thread. This can lead to an unexpected seat movement in the event of an accident and increase the risk of…
A12/03636/24 ↗Texto completo
Some front and/or rear passenger seat fixations are not strong enough because of a problem on the fixing nuts' thread. This can lead to an unexpected seat movement in the event of an accident and increase the risk of injury.
The rear coil springs may be incorrectly fitted. This could lead to a loss of vehicle handling, increasing the risk of an accident. Additionally, the springs may detach from their support and fall onto the road while…
A12/02791/24 ↗Texto completo
The rear coil springs may be incorrectly fitted. This could lead to a loss of vehicle handling, increasing the risk of an accident. Additionally, the springs may detach from their support and fall onto the road while driving, posing a risk to the following traffic.
Due to a problem during the pre-moulding vulcanisation process, the timing belt can deteriorate and cause the engine to stall while driving or failing to start, creating a risk of accidents and injuries to vehicle…
A12/02711/24 ↗Texto completo
Due to a problem during the pre-moulding vulcanisation process, the timing belt can deteriorate and cause the engine to stall while driving or failing to start, creating a risk of accidents and injuries to vehicle occupants.
In some braking situations the Controller Area Network (CAN) system might send erroneously a CAN signal “invalid value” for vacuum pressure in booster. This deactivates thee Hydraulic Brake compensation, causing a brake…
A12/01573/24 ↗Texto completo
In some braking situations the Controller Area Network (CAN) system might send erroneously a CAN signal “invalid value” for vacuum pressure in booster. This deactivates thee Hydraulic Brake compensation, causing a brake vacuum loss that can lead to reduced braking performance. This increases the risk of accidents and injuries.
A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system urea injector stopsworking. This may result in higher emissions and poses a risk to…
A12/03033/23 ↗Texto completo
A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system urea injector stopsworking. This may result in higher emissions and poses a risk to theenvironment.
The high-pressure fuel pump and the timing belt of the engine may malfunction, which can lead to an engine breakdown/stalling while driving, increasing the risk of an accident.
A12/02274/23 ↗The screws in the front subframe and the steering rack may not be tightened to the required torque, which can cause these parts to become detached, which in turn can reduce vehicle control and increase the risk of an…
A12/00308/23 ↗Texto completo
The screws in the front subframe and the steering rack may not be tightened to the required torque, which can cause these parts to become detached, which in turn can reduce vehicle control and increase the risk of an accident.
The fuel tube may become damaged over time and leak, increasing the risk of fire. Moreover, leaking fuel may impair the vehicle's controllability and poses a risk for other road users.
A12/01674/22 ↗Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…
A12/00444/21 ↗Texto completo
Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive…
A12/1739/18 ↗Texto completo
The airbag control module for the supplemental restraint system (SRS ECU) has been assembled with application-specific integrated circuits (ASICs) that are susceptible to internal shorting when exposed to high inductive electrical noise from various vehicle electrical components. If this occurs, there is a possibility that the ASIC could become damaged, leading to the airbag(s) and/or seat belt pretensioners being deactivated or deploying inadvertently.
null The mounting for the air-conditioning compressor may not be securely attached and may break. The compressor could then become detached from the vehicle and fall into the road.
A12/1026/17 ↗null 1. Incorrect fuel cap seal installation could lead to fuel leakage.2. Incorrect front shock absorber to hub tightening could affect the vehicle handling.3. The earth cable attachment point for the airbag control…
A12/0162/17 ↗Texto completo
null 1. Incorrect fuel cap seal installation could lead to fuel leakage.2. Incorrect front shock absorber to hub tightening could affect the vehicle handling.3. The earth cable attachment point for the airbag control unit may not be properly tightened which could lead to the airbags malfunctioning.4. The bolts holding the steering valve on the steering rack may be missing or incorrectly tightened which could affect the steering.5. Incorrect tightening of one of the nuts fixing the brake pedal to the brake booster could lead to a sudden loss of brake assistance.6. Water could leak into the cabin and reach the airbag module leading to unexpected airbag deployment.7. Wheel bolt looseness could lead to the wheel detaching during driving.
null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.
A12/0102/17 ↗null Under certain conditions condensation in the intake air corrodes the needle bearing housing, thus, the sealing between intake air and the electrical actuator circuit of the throttle body might not be water-tight…
A12/0149/16 ↗Texto completo
null Under certain conditions condensation in the intake air corrodes the needle bearing housing, thus, the sealing between intake air and the electrical actuator circuit of the throttle body might not be water-tight any more. If water enters in the throttle body actuator circuit, the water might cause a throttle body position misreading or short circuit inside the throttle body electrical actuation mechanism. This might trigger the engine to stall while driving.
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…
A12/1918/14 ↗Texto completo
null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.
null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside…
A12/1624/14 ↗Texto completo
null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside temperatures, the fuel might leak into the sensor and then out through the ventilation hole. This could lead to a fire.
null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come…
A12/0143/14 ↗Texto completo
null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come off, and the steering wheel could separate from the steering shaft, causing a loss of steering ability and the risk of a crash.
null The brake hydraulic pressure may not increase sufficiently during harsh braking. This could result in an increased stopping distance.
A12/1820/13 ↗null In the electric power steering control module of the vehicles concerned, condensed water droplets could attach between the terminals in the relay which supplies power to the power steering motor and cause a short…
A12/0891/13 ↗Texto completo
null In the electric power steering control module of the vehicles concerned, condensed water droplets could attach between the terminals in the relay which supplies power to the power steering motor and cause a short circuit. If this occurred, the power steering assistance could stop working and an increased steering effort would have to be exerted by the driver.
Due to loss of control of the vehicle, the product poses a risk of accident. Given the improper moulding of the resin body of the crankshaft position sensor installed on the engine block, engine oil may penetrate the…
0494/06 ↗Texto completo
Due to loss of control of the vehicle, the product poses a risk of accident. Given the improper moulding of the resin body of the crankshaft position sensor installed on the engine block, engine oil may penetrate the seal and enter the sensor wiring connector. In this condition, engine oil inside the sensor wiring connector could cause expansion due to the heat of the engine and could deform the sensor wiring connector. In the worst case, the connector may become disconnected, which could cause the engine to stall while driving and not be able to be restarted.
These cars pose a risk of injuries.Due to incorrect programming of the electronic control unit (ECU), the seat-belt pre-tensioner for the right side of vehicle is disabled instead of the passenger’s airbag in the…
0457/06 ↗Texto completo
These cars pose a risk of injuries.Due to incorrect programming of the electronic control unit (ECU), the seat-belt pre-tensioner for the right side of vehicle is disabled instead of the passenger’s airbag in the affected vehicles when the “airbag manual on-off system” is turned off. This poses a risk of injuries for the co-passenger due to non-function of the seat-belt pre-tensioner.