AutoDefects
Español

Toyota Verso 2014: fiabilidad

41 % menos fallos mecánicos que su clase

2928 inspecciones MOT de Toyota Verso matriculados por primera vez en 2014: el 12,1 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 20,4 %.

Tasa de fallo mecánico
12,1%
Mediana de la clase, misma edad y kilometraje
20,4%
No pasó la MOT (cualquier motivo)
25,1%
inspecciones MOT
2928
Llamadas a revisión
2

Qué falla según el kilometraje

KilometrajeInspeccionesFallo mecánicoMediana de la clase
0-50k km661,5%6,8%
50-100k km7396,0%14,2%
100-150k km114211,6%20,0%
150k+ km98117,9%26,4%

Qué falla en este año

SistemaFallo mecánico
Suspensión y ruedas5,1%
Frenos5,1%
Motor, escape y emisiones2,2%
Dirección1,0%
Carrocería, bastidor y corrosión0,9%
Cinturones y airbags0,8%
Luces y electricidad (desgaste)11,8%
Neumáticos (desgaste)6,6%
Escobillas y parabrisas (desgaste)3,8%
Otros y matrículas (desgaste)0,2%

Llamadas a revisión oficiales

Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.

  • EU Safety GateGrave2008–2014

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…

    Texto completo

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

    A12/1918/14 ↗
  • EU Safety GateGrave2014

    null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside…

    Texto completo

    null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside temperatures, the fuel might leak into the sensor and then out through the ventilation hole. This could lead to a fire.

    A12/1624/14 ↗