AutoDefects
Polski

Toyota Verso 2014: niezawodność

o 41% mniej usterek mechanicznych niż w klasie

2928 badań MOT egzemplarzy Toyota Verso zarejestrowanych po raz pierwszy w 2014: 12,1% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 20,4%.

Usterki mechaniczne
12,1%
Mediana klasy, ten sam wiek i przebieg
20,4%
Negatywne badanie (dowolny powód)
25,1%
badań MOT
2928
Akcje przywoławcze
2

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km661,5%6,8%
50-100k km7396,0%14,2%
100-150k km114211,6%20,0%
150k+ km98117,9%26,4%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła5,1%
Hamulce5,1%
Silnik, wydech i emisja2,2%
Układ kierowniczy1,0%
Nadwozie, podwozie i korozja0,9%
Pasy i poduszki powietrzne0,8%
Oświetlenie i elektryka (eksploatacja)11,8%
Opony (eksploatacja)6,6%
Wycieraczki i szyba (eksploatacja)3,8%
Inne i tablice (eksploatacja)0,2%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2008–2014

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…

    Pełny tekst

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

    A12/1918/14 ↗
  • EU Safety GatePoważne2014

    null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside…

    Pełny tekst

    null In the fuel filter, the resin moulding surrounding the O-ring of the water level sensor is unsuitable, causing insufficient compression of the ring. This means that when the engine is started at low outside temperatures, the fuel might leak into the sensor and then out through the ventilation hole. This could lead to a fire.

    A12/1624/14 ↗