AutoDefects
Polski

Toyota Verso 2013: niezawodność

o 43% mniej usterek mechanicznych niż w klasie

3228 badań MOT egzemplarzy Toyota Verso zarejestrowanych po raz pierwszy w 2013: 13,5% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 23,7%.

Usterki mechaniczne
13,5%
Mediana klasy, ten sam wiek i przebieg
23,7%
Negatywne badanie (dowolny powód)
30,2%
badań MOT
3228
Akcje przywoławcze
2

Co się psuje w zależności od przebiegu

PrzebiegBadaniaUsterki mechaniczneMediana klasy
0-50k km620,0%9,5%
50-100k km5527,4%14,4%
100-150k km112012,5%23,1%
150k+ km149417,1%28,2%

Co się psuje w tym roczniku

UkładUsterki mechaniczne
Zawieszenie i koła5,2%
Hamulce6,5%
Silnik, wydech i emisja1,4%
Układ kierowniczy1,3%
Nadwozie, podwozie i korozja1,2%
Pasy i poduszki powietrzne1,0%
Oświetlenie i elektryka (eksploatacja)17,0%
Opony (eksploatacja)5,3%
Wycieraczki i szyba (eksploatacja)4,9%
Inne i tablice (eksploatacja)0,4%

Oficjalne akcje przywoławcze

Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.

  • EU Safety GatePoważne2008–2014

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…

    Pełny tekst

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

    A12/1918/14 ↗
  • EU Safety GatePoważne2013

    null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come…

    Pełny tekst

    null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come off, and the steering wheel could separate from the steering shaft, causing a loss of steering ability and the risk of a crash.

    A12/0143/14 ↗