AutoDefects
Deutsch

Toyota Verso 2013: Zuverlässigkeit

43% weniger technische Mängel als die Klasse

3.228 MOT-Prüfungen von Toyota Verso mit Erstzulassung 2013: 13,5% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 23,7%.

Technische Mängelquote
13,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
23,7%
Durchgefallen (jeder Grund)
30,2%
MOT-Prüfungen
3.228
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km620,0%9,5%
50-100k km5527,4%14,4%
100-150k km1.12012,5%23,1%
150k+ km1.49417,1%28,2%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder5,2%
Bremsen6,5%
Motor, Abgasanlage und Emissionen1,4%
Lenkung1,3%
Karosserie, Rahmen und Rost1,2%
Gurte und Airbags1,0%
Licht und Elektrik (Verschleiß)17,0%
Reifen (Verschleiß)5,3%
Wischer und Scheibe (Verschleiß)4,9%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2008–2014

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage,…

    Volltext

    null Due to insufficient air flow efficiency in the intake system, oil may accumulate in the intercooler. Under certain driving conditions, the oil may flow into the combustion chamber and might cause engine damage, which may increase the risk of a fire in the engine compartment due to leaked oil.

    A12/1918/14 ↗
  • EU Safety GateErnst2013

    null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come…

    Volltext

    null Due to improper tightening of the steering wheel set nut during vehicle assembly, the steering wheel nut could become loose. If the vehicle was continuously operated in this condition, the nut could eventually come off, and the steering wheel could separate from the steering shaft, causing a loss of steering ability and the risk of a crash.

    A12/0143/14 ↗