AutoDefects
Deutsch

Toyota Verso 2016: Zuverlässigkeit

26% weniger technische Mängel als die Klasse

3.482 MOT-Prüfungen von Toyota Verso mit Erstzulassung 2016: 9,3% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 12,6%.

Technische Mängelquote
9,3%
Klassenmedian, gleiches Alter und gleiche Laufleistung
12,6%
Durchgefallen (jeder Grund)
21,9%
MOT-Prüfungen
3.482
Rückrufe
5

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km2173,2%5,6%
50-100k km1.4485,9%10,3%
100-150k km1.1069,9%14,2%
150k+ km71117,2%17,1%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder3,7%
Bremsen4,2%
Motor, Abgasanlage und Emissionen1,2%
Lenkung0,4%
Karosserie, Rahmen und Rost0,6%
Gurte und Airbags0,7%
Licht und Elektrik (Verschleiß)9,2%
Reifen (Verschleiß)6,3%
Wischer und Scheibe (Verschleiß)3,6%
Sonstiges und Kennzeichen (Verschleiß)0,2%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2016–2022

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…

    Volltext

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.

    SR/02942/25 ↗
  • EU Safety GateErnst2015–2018

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in…

    Volltext

    Due to insufficient durability, the Exhaust Gas Recirculation (EGR) cooler may develop an internal coolant leak which could create smouldering deposits inside the EGR cooler and the intake manifold.This may result in localised thermal damage in the intake system, which might lead to engine power reduction and to increased risk of fire.

    A12/00444/21 ↗
  • EU Safety Gate2016, 2017

    null The mounting for the air-conditioning compressor may not be securely attached and may break. The compressor could then become detached from the vehicle and fall into the road.

    A12/1026/17 ↗
  • EU Safety GateErnst2016

    null 1. Incorrect fuel cap seal installation could lead to fuel leakage.2. Incorrect front shock absorber to hub tightening could affect the vehicle handling.3. The earth cable attachment point for the airbag control…

    Volltext

    null 1. Incorrect fuel cap seal installation could lead to fuel leakage.2. Incorrect front shock absorber to hub tightening could affect the vehicle handling.3. The earth cable attachment point for the airbag control unit may not be properly tightened which could lead to the airbags malfunctioning.4. The bolts holding the steering valve on the steering rack may be missing or incorrectly tightened which could affect the steering.5. Incorrect tightening of one of the nuts fixing the brake pedal to the brake booster could lead to a sudden loss of brake assistance.6. Water could leak into the cabin and reach the airbag module leading to unexpected airbag deployment.7. Wheel bolt looseness could lead to the wheel detaching during driving.

    A12/0162/17 ↗
  • EU Safety GateErnst2016

    null The mixing ratio of the fire starter component may be incorrect in some initiators. As a result, the side airbag may not deploy.

    A12/0102/17 ↗