Toyota Proace 2022: reliability
162 MOT tests of Toyota Proace cars first registered in 2022: 4.9% failed for a mechanical defect; the class median at the same age and mileage is 4.1%.
- Mechanical failure rate
- 4.9%
- Class median, same age and mileage
- 4.1%
- Failed MOT (any reason)
- 12.4%
- MOT tests
- 162
- Recalls
- 14
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 70 | 4.3% | 1.4% |
| 50-100k km | 67 | 3.0% | 5.5% |
| 100-150k km | 19 | 10.5% | 7.6% |
| 150k+ km | 6 | 16.7% | 9.2% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
A software calibration error in the Engine Electronic Control Unit (ECU) causes incorrect IUPR (In-Use Performance Ratio) values, which may delay the malfunction indicator (MIL) warning. As a result, the vehicle could…
SR/04074/25 ↗Full text
A software calibration error in the Engine Electronic Control Unit (ECU) causes incorrect IUPR (In-Use Performance Ratio) values, which may delay the malfunction indicator (MIL) warning. As a result, the vehicle could exceed emission limits before the driver is alerted.
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…
SR/02942/25 ↗Full text
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02656/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell voltage and/or the battery temperature can occur. This can lead the failsafe system…
SR/01299/25 ↗Full text
Due to an error in the software calibrations of the traction high voltage battery control unit, a false detection of the battery cell voltage and/or the battery temperature can occur. This can lead the failsafe system to cut the motor power to prevent any damage to the battery, causing a loss of drive. This can increase the risk of accidents and injuries.
Due to a problem during the pre-moulding vulcanisation process, the timing belt can deteriorate and cause the engine to stall while driving or failing to start, creating a risk of accidents and injuries to vehicle…
A12/02711/24 ↗Full text
Due to a problem during the pre-moulding vulcanisation process, the timing belt can deteriorate and cause the engine to stall while driving or failing to start, creating a risk of accidents and injuries to vehicle occupants.
The loading capacity of the rear tyres is lower than its maximum permitted load. This could lead to a loss of control over the vehicle, creating a risk of an accident.
A12/01335/23 ↗
Show 8 more recalls
The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically…
INFO/00118/23 ↗Full text
The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically re-establish the connection with the vehicle if the initial connection has ended.This can hinder or delay emergency assistance, treatment of injuries.
A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system shuts down. This may result in higher emissions and poses a risk to the environment.
A12/01460/23 ↗The air conditioning system may be faulty, causing loss of current inside the compressor. The diagnostic software will detect this loss of power and shut down the vehicle's power-train without warning, increasing the…
A12/01055/23 ↗Full text
The air conditioning system may be faulty, causing loss of current inside the compressor. The diagnostic software will detect this loss of power and shut down the vehicle's power-train without warning, increasing the risk of an accident.
The auxiliary battery terminal may be faulty. This can disable the power steering support. Moreover, the battery terminal can overheat at low speeds, increasing the risk of fire.
A12/00429/23 ↗Due to faulty software in the traction battery control unit, false detection of cell voltage and/or battery temperature may occur. This may result in engine power being cut off by the safety system to prevent any damage…
A12/00152/23 ↗Full text
Due to faulty software in the traction battery control unit, false detection of cell voltage and/or battery temperature may occur. This may result in engine power being cut off by the safety system to prevent any damage to the traction battery, resulting in loss of drive, increasing the risk of an accident.
The fuel tube may become damaged over time and leak, increasing the risk of fire. Moreover, leaking fuel may impair the vehicle's controllability and poses a risk for other road users.
A12/01674/22 ↗The rear brake caliper may have been assembled incorrectly during production, which can lead to the braking functions not working properly. As a result, during parking the vehicle may move unintentionally, or while…
A12/01147/22 ↗Full text
The rear brake caliper may have been assembled incorrectly during production, which can lead to the braking functions not working properly. As a result, during parking the vehicle may move unintentionally, or while driving the braking force may not be fully released from the wheel, increasing the risk of an accident.
The traction battery wiring harness connector may overheat, which could cause fire.
A12/01155/22 ↗