AutoDefects
English

Toyota Proace 2017: reliability

8% fewer mechanical failures than the class

1,634 MOT tests of Toyota Proace cars first registered in 2017: 17.1% failed for a mechanical defect; the class median at the same age and mileage is 18.5%.

Mechanical failure rate
17.1%
Class median, same age and mileage
18.5%
Failed MOT (any reason)
29.7%
MOT tests
1,634
Recalls
10

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km708.6%9.2%
50-100k km46412.9%14.9%
100-150k km53217.9%19.0%
150k+ km56820.8%22.0%

What fails on this year

SystemMechanical fail
Suspension and wheels6.5%
Brakes6.1%
Engine, exhaust and emissions4.1%
Steering0.2%
Body, chassis and corrosion5.1%
Seat belts and airbags0.8%
Lights and electrics (wear)15.2%
Tyres (wear)5.0%
Wipers and windscreen (wear)4.4%
Other and plates (wear)0.4%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2017–2021

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…

    Full text

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.

    SR/02983/25 ↗
  • EU Safety Gate2016–2022

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…

    Full text

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.

    SR/02942/25 ↗
  • EU Safety Gate2016, 2017

    Due to an incorrectly fixed cable, the rear window defogger may not work properly, which in turn can could reduce visibility and could lead to road accidents.

    A12/00327/22 ↗
  • EU Safety Gate2016–2019

    The engine timing belt may wear out prematurely over time due to abrasive wear and/or excessive belt tension. As a result, the engine might stall during driving, increasing the risk of an accident.

    A12/00246/21 ↗
  • EU Safety GateSerious2016–2019

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the…

    Full text

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the risk of accident.The shaft of the parking brake might have been incorrectly manufactured.As a result, the parking brake might not properly function and the vehicle might unintentionally move, increasing the risk of accident.The fuel tube can move against the ribs of the urea tank.As a result, it may become damaged and leak fuel, which might get ignited, increasing the risk of fire.An insufficient torque might have been applied to the seat belt fixation, seat belt anchor and ground cable bolts.As a result, the seat belt fixation and anchor might become loose, increasing the risk of injuries in the event of an accident or the ground cable might overheat, increasing the risk of fire.The mastic in the front left and right wheel arch panels might been applied incorrectly. As a result, water could filter and reach the airbag module, increasing the risk of accident or injuries in the event of an accident.

    A12/00010/19 ↗
  • EU Safety GateSerious2016–2019

    The seat belt on the front passenger seat may unbuckle unintentionally. As a result, the front seat passenger would not be secured in the event of an accident, increasing the risk of an injury.

    A12/1220/19 ↗
Show 4 more recalls
  • EU Safety Gate2016–2018

    The tightening torque of the threaded connection between the ball joint and knuckle may decrease and the A/C compressor pulley could break. If this occurs, the pulley will separate into 2 components that will rotate…

    Full text

    The tightening torque of the threaded connection between the ball joint and knuckle may decrease and the A/C compressor pulley could break. If this occurs, the pulley will separate into 2 components that will rotate against each other, generating heat. The bolts holding the front and rear suspension arm to the chassis could be deformed and break and the steering rack fixation might be damaged. The ball joint might detach from the knuckle. The heat generated at the AC compressor pulley may damage surrounding parts. The front suspension arm and the rear arm could detach from the chassis during driving. Moreover, the steering rack might detach during driving.

    A12/0017/19 ↗
  • EU Safety Gate2016, 2017

    The trailer coupling device can become deformed if a trailer is used. If this occurs, it may become difficult to control the vehicle and the trailer might become detached from the vehicle.

    A12/1386/18 ↗
  • EU Safety Gate2016, 2017

    null The starter relay may be faulty, which could lead to inadvertent movement of the vehicle.

    A12/1164/17 ↗
  • EU Safety Gate2016, 2017

    null The mounting for the air-conditioning compressor may not be securely attached and may break. The compressor could then become detached from the vehicle and fall into the road.

    A12/1026/17 ↗