AutoDefects
English

Toyota Proace 2018: reliability

7% fewer mechanical failures than the class

2,008 MOT tests of Toyota Proace cars first registered in 2018: 13.6% failed for a mechanical defect; the class median at the same age and mileage is 14.6%.

Mechanical failure rate
13.6%
Class median, same age and mileage
14.6%
Failed MOT (any reason)
27.1%
MOT tests
2,008
Recalls
9

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km1195.0%6.8%
50-100k km63411.0%12.2%
100-150k km65913.4%15.2%
150k+ km59618.1%18.2%

What fails on this year

SystemMechanical fail
Suspension and wheels3.5%
Brakes6.0%
Engine, exhaust and emissions3.0%
Steering0.3%
Body, chassis and corrosion3.5%
Seat belts and airbags0.5%
Lights and electrics (wear)14.6%
Tyres (wear)5.3%
Wipers and windscreen (wear)3.2%
Other and plates (wear)0.1%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2017–2021

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…

    Full text

    A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.

    SR/02983/25 ↗
  • EU Safety Gate2016–2022

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…

    Full text

    Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.

    SR/02942/25 ↗
  • EU Safety Gate2018–2023

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…

    Full text

    Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.

    SR/02656/25 ↗
  • EU Safety Gate2018–2021

    Due to an error in the specific software for calibration of the electronic engine control unit (ECU), an incorrect value is provided when the data is processed by the vehicle.

    INFO/00012/22 ↗
  • EU Safety Gate2016–2019

    The engine timing belt may wear out prematurely over time due to abrasive wear and/or excessive belt tension. As a result, the engine might stall during driving, increasing the risk of an accident.

    A12/00246/21 ↗
  • EU Safety GateSerious2016–2019

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the…

    Full text

    The rear brake tube is not tightly connected to the holding clip on the lower suspension arm.As a result, it may become damaged and leak brake fluid, reducing the braking performance of the vehicle and increasing the risk of accident.The shaft of the parking brake might have been incorrectly manufactured.As a result, the parking brake might not properly function and the vehicle might unintentionally move, increasing the risk of accident.The fuel tube can move against the ribs of the urea tank.As a result, it may become damaged and leak fuel, which might get ignited, increasing the risk of fire.An insufficient torque might have been applied to the seat belt fixation, seat belt anchor and ground cable bolts.As a result, the seat belt fixation and anchor might become loose, increasing the risk of injuries in the event of an accident or the ground cable might overheat, increasing the risk of fire.The mastic in the front left and right wheel arch panels might been applied incorrectly. As a result, water could filter and reach the airbag module, increasing the risk of accident or injuries in the event of an accident.

    A12/00010/19 ↗
Show 3 more recalls
  • EU Safety GateSerious2016–2019

    The seat belt on the front passenger seat may unbuckle unintentionally. As a result, the front seat passenger would not be secured in the event of an accident, increasing the risk of an injury.

    A12/1220/19 ↗
  • EU Safety Gate2016–2018

    The tightening torque of the threaded connection between the ball joint and knuckle may decrease and the A/C compressor pulley could break. If this occurs, the pulley will separate into 2 components that will rotate…

    Full text

    The tightening torque of the threaded connection between the ball joint and knuckle may decrease and the A/C compressor pulley could break. If this occurs, the pulley will separate into 2 components that will rotate against each other, generating heat. The bolts holding the front and rear suspension arm to the chassis could be deformed and break and the steering rack fixation might be damaged. The ball joint might detach from the knuckle. The heat generated at the AC compressor pulley may damage surrounding parts. The front suspension arm and the rear arm could detach from the chassis during driving. Moreover, the steering rack might detach during driving.

    A12/0017/19 ↗
  • EU Safety Gate2018

    An oil plug located on the side of the engine may not be properly tightened. Engine oil could consequently leak and fall onto the road posing a risk for following traffic.

    A12/1091/18 ↗