Toyota Proace 2021: reliability
2,758 MOT tests of Toyota Proace cars first registered in 2021: 8.3% failed for a mechanical defect; the class median at the same age and mileage is 8.4%.
- Mechanical failure rate
- 8.3%
- Class median, same age and mileage
- 8.4%
- Failed MOT (any reason)
- 24.1%
- MOT tests
- 2,758
- Recalls
- 14
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 920 | 4.0% | 4.8% |
| 50-100k km | 1,381 | 10.1% | 9.7% |
| 100-150k km | 385 | 11.4% | 11.6% |
| 150k+ km | 72 | 13.9% | 13.1% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate…
SR/02983/25 ↗Full text
A calibration error in the Engine Electronic Control Unit (ECU) software may prevent the Malfunction Indicator Lamp (MIL) from activating when the Selective Catalytic Reduction (SCR) system and/or Diesel Particulate Filter (DPF) fails, risking undetected faults and resulting in emissions above the regulatory limits.
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and…
SR/02942/25 ↗Full text
Vehicles may have excessive corrosion on the front suspension arm bolt, due to the design in combination with environmental factors. As a result, the bolt may fail which may affect controllability of the vehicle and increase the risk of an accident.
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control…
SR/02656/25 ↗Full text
Due to oil carbonisation and high contact pressure, the 7 mm camshaft chain resistance can be reduced. This may cause the camshaft chain to break, leading to an engine failure. This can cause a loss of vehicle's control and increase the risk of accidents and injuries.
The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically…
INFO/00118/23 ↗Full text
The telematics unit for e-Call may not work as required. The Public Safety Answering Points (PSAPs), the automatic callback function from the PSAP, to the vehicle does not work. The PSAP cannot automatically re-establish the connection with the vehicle if the initial connection has ended.This can hinder or delay emergency assistance, treatment of injuries.
A software error in the Engine Control Unit prevents the Malfunction Indicator Light (MIL) from activating if the urea injection system shuts down. This may result in higher emissions and poses a risk to the environment.
A12/01460/23 ↗The air conditioning system may be faulty, causing loss of current inside the compressor. The diagnostic software will detect this loss of power and shut down the vehicle's power-train without warning, increasing the…
A12/01055/23 ↗Full text
The air conditioning system may be faulty, causing loss of current inside the compressor. The diagnostic software will detect this loss of power and shut down the vehicle's power-train without warning, increasing the risk of an accident.
Show 8 more recalls
The auxiliary battery terminal may be faulty. This can disable the power steering support. Moreover, the battery terminal can overheat at low speeds, increasing the risk of fire.
A12/00429/23 ↗The underbody cover fails to stop flammable materials to accumulate under the engine, increasing the risk of fire.
A12/00307/23 ↗The fuel tube may become damaged over time and leak, increasing the risk of fire. Moreover, leaking fuel may impair the vehicle's controllability and poses a risk for other road users.
A12/01674/22 ↗The urea (Adblue) injection system may not function in low ambient temperature when the urea is frozen, due to insufficient performance of the heater inside the urea reservoir. As a result, there is a risk of vehicle…
A12/01517/22 ↗Full text
The urea (Adblue) injection system may not function in low ambient temperature when the urea is frozen, due to insufficient performance of the heater inside the urea reservoir. As a result, there is a risk of vehicle emission levels to betemporary out of regulatory limits.
One or both cushions of the two-person front row seat might not be locked to the backrests. As a consequence, the head restraint may become completely detached from the seat backrest, increasing the risk of injury to…
A12/00755/22 ↗Full text
One or both cushions of the two-person front row seat might not be locked to the backrests. As a consequence, the head restraint may become completely detached from the seat backrest, increasing the risk of injury to the occupants in the event of a sudden stop or accident.
Due to an error in the specific software for calibration of the electronic engine control unit (ECU), an incorrect value is provided when the data is processed by the vehicle.
INFO/00012/22 ↗If there is a fuel leakage from the auxiliary heater, which could cause fuel to leak onto the road surface, the road could become slippery which could cause an incident.
A11/00111/21 ↗The welding of the rear suspension spring holder on the underbody of the vehicle may be inadequate. As a result, the spring holder could detach, causing the rear suspension spring to displace from its designed position…
A12/01101/21 ↗Full text
The welding of the rear suspension spring holder on the underbody of the vehicle may be inadequate. As a result, the spring holder could detach, causing the rear suspension spring to displace from its designed position and fall on the road, affecting the controllability of the vehicle and increasing the risk of accident.