Suzuki Swift 2015: reliability
12,389 MOT tests of Suzuki Swift cars first registered in 2015: 9.2% failed for a mechanical defect; the class median at the same age and mileage is 17.1%.
- Mechanical failure rate
- 9.2%
- Class median, same age and mileage
- 17.1%
- Failed MOT (any reason)
- 24.2%
- MOT tests
- 12,389
- Recalls
- 5
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 1,669 | 4.0% | 7.9% |
| 50-100k km | 5,954 | 8.0% | 14.8% |
| 100-150k km | 3,733 | 11.6% | 22.0% |
| 150k+ km | 1,033 | 15.7% | 27.6% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Full text
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
Due to the engine vibrations, the brake lines and the support on which the motor is mounted may come into contact. This may lead to loss of braking performance over time.
A12/1775/18 ↗null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively…
A12/1033/16 ↗Full text
null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively causing a fire.
null A defect in the rear wheel brake may cause a sudden decrease of brake force.
A12/0874/16 ↗null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Full text
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.