Suzuki Swift 2015: niezawodność
12 389 badań MOT egzemplarzy Suzuki Swift zarejestrowanych po raz pierwszy w 2015: 9,2% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 17,1%.
- Usterki mechaniczne
- 9,2%
- Mediana klasy, ten sam wiek i przebieg
- 17,1%
- Negatywne badanie (dowolny powód)
- 24,2%
- badań MOT
- 12 389
- Akcje przywoławcze
- 5
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 1669 | 4,0% | 7,9% |
| 50-100k km | 5954 | 8,0% | 14,8% |
| 100-150k km | 3733 | 11,6% | 22,0% |
| 150k+ km | 1033 | 15,7% | 27,6% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Pełny tekst
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
Due to the engine vibrations, the brake lines and the support on which the motor is mounted may come into contact. This may lead to loss of braking performance over time.
A12/1775/18 ↗null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively…
A12/1033/16 ↗Pełny tekst
null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively causing a fire.
null A defect in the rear wheel brake may cause a sudden decrease of brake force.
A12/0874/16 ↗null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Pełny tekst
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.