Suzuki Swift 2015: Zuverlässigkeit
12.389 MOT-Prüfungen von Suzuki Swift mit Erstzulassung 2015: 9,2% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 17,1%.
- Technische Mängelquote
- 9,2%
- Klassenmedian, gleiches Alter und gleiche Laufleistung
- 17,1%
- Durchgefallen (jeder Grund)
- 24,2%
- MOT-Prüfungen
- 12.389
- Rückrufe
- 5
Was nach Laufleistung ausfällt
| Laufleistung | Prüfungen | Technische Mängel | Klassenmedian |
|---|---|---|---|
| 0-50k km | 1.669 | 4,0% | 7,9% |
| 50-100k km | 5.954 | 8,0% | 14,8% |
| 100-150k km | 3.733 | 11,6% | 22,0% |
| 150k+ km | 1.033 | 15,7% | 27,6% |
Was bei diesem Baujahr ausfällt
Amtliche Rückrufe
Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Volltext
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
Due to the engine vibrations, the brake lines and the support on which the motor is mounted may come into contact. This may lead to loss of braking performance over time.
A12/1775/18 ↗null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively…
A12/1033/16 ↗Volltext
null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively causing a fire.
null A defect in the rear wheel brake may cause a sudden decrease of brake force.
A12/0874/16 ↗null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Volltext
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.