Suzuki Swift 2015: fiabilidad
12.389 inspecciones MOT de Suzuki Swift matriculados por primera vez en 2015: el 9,2 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 17,1 %.
- Tasa de fallo mecánico
- 9,2%
- Mediana de la clase, misma edad y kilometraje
- 17,1%
- No pasó la MOT (cualquier motivo)
- 24,2%
- inspecciones MOT
- 12.389
- Llamadas a revisión
- 5
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 1669 | 4,0% | 7,9% |
| 50-100k km | 5954 | 8,0% | 14,8% |
| 100-150k km | 3733 | 11,6% | 22,0% |
| 150k+ km | 1033 | 15,7% | 27,6% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed…
A12/01781/22 ↗Texto completo
Due to the swelling of the valve in the vacuum pump, the negative pressure of the brake boosters can be temporarily blocked. Consequently, even if the braking system remains functional, the brake pedal must be pressed hard, increasing the risk of an accident.
Due to the engine vibrations, the brake lines and the support on which the motor is mounted may come into contact. This may lead to loss of braking performance over time.
A12/1775/18 ↗null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively…
A12/1033/16 ↗Texto completo
null The adhesive force of the double sided tapes which fix the front seat heater to the seat may deteriorate and the seat heater could consequently move. This could lead to part of the seat heating up excessively causing a fire.
null A defect in the rear wheel brake may cause a sudden decrease of brake force.
A12/0874/16 ↗null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens,…
A12/0399/16 ↗Texto completo
null The abrasion coefficient modification coating may not been have been applied on the rear axle bolts during the manufacturing of the bolts. The bolts might consequently loosen, come off or break. If this happens, the vehicle could become impossible to drive.