Small SUVs
Renault Captur reliability
In 154,624 UK MOT tests, 13.5% of Renault Captur cars failed for a mechanical or structural defect. The median small SUV of the same age and mileage: 12.2%.
- Best years
- —
- Years with most failures
- 2019, 2020, 2022
- Weak spot at high mileage
- Suspension and wheels, Brakes, Body, chassis and corrosion
- Official recalls
- 3 recalls, 1 serious
- Mechanical failure rate
- 13.5%
- Class median, same age and mileage
- 12.2%
- MOT tests
- 154,624
- US owner complaints
- 0
Failure rate by year of first registration
Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.
What fails, by mileage
Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.
(…) = Class median, same age and mileage
Pre-purchase checklist for the mechanic
Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.
- Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
- Brakes: measure discs and pads, check brake pipes and hoses for corrosion, and test the handbrake and ABS warning light.
- Body and chassis: inspect sills, subframes, jacking points and the floor for corrosion and previous repairs.
- Recalls: ask for proof that open recall work for this model has been done (the dealer can check by VIN).
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P…
OR/00145/25 ↗Full text
The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P button is pressed on the transmission selector, when the engine is switched off, when the driver’s safety-belt is released or when the driver door is opened. This increases the risk of accidents and injuries, although the Assisted Parking Brake (APB) remains functional and allows the vehicle to be immobilised.
The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P…
SR/03262/25 ↗Full text
The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P button is pressed on the transmission selector, when the engine is switched off, when the driver’s safety-belt is released or when the driver door is opened. This increases the risk of accidents and injuries, although the Assisted Parking Brake (APB) remains functional and allows the vehicle to be immobilised.
Due to an inappropriate manufacturing process, the gasket seal between the solenoid valve block and the LPG container may be missing. This can cause an LPG leak. As LPG is inflammable, there is a risk of the vehicle…
SR/01507/25 ↗Full text
Due to an inappropriate manufacturing process, the gasket seal between the solenoid valve block and the LPG container may be missing. This can cause an LPG leak. As LPG is inflammable, there is a risk of the vehicle catching fire.