AutoDefects
English

Small SUVs

Dacia Duster reliability

In 72,253 UK MOT tests, 12.5% of Dacia Duster cars failed for a mechanical or structural defect. The median small SUV of the same age and mileage: 11.7%.

67of 100Average7% more mechanical failures than the class
Best years
2015
Years with most failures
2019, 2020, 2021
Weak spot at high mileage
Brakes, Suspension and wheels, Steering
Official recalls
5 recalls, 2 serious
Mechanical failure rate
12.5%
Class median, same age and mileage
11.7%
MOT tests
72,253
US owner complaints
0

Failure rate by year of first registration

Mechanical failure rate at the 2024 MOT, by the year the car was first registered, against the median of its class at the same age and mileage.

This modelClass median
0%11%22%2013: 29.8%2013 Class median: 30.7%132014: 25.8%2014 Class median: 26.7%142015: 20.0%2015 Class median: 22.0%152016: 18.0%2016 Class median: 16.5%162017: 13.2%2017 Class median: 11.8%172018: 9.6%2018 Class median: 7.5%182019: 6.6%2019 Class median: 4.7%192020: 4.3%2020 Class median: 3.2%202021: 3.0%2021 Class median: 2.3%212022: 2.6%2022 Class median: 2.0%22
YearTestsMechanical failClass medianAny failRecalls
20223902.6%2.0%9.0%0
20218,7403.0%2.3%16.2%0
20208,3404.3%3.2%19.9%0
201914,9436.6%4.7%24.8%0
20188,6189.6%7.5%26.1%0
20176,41413.2%11.8%27.0%0
20167,03218.0%16.5%32.0%0
20155,82720.0%22.0%35.5%0
20145,64825.8%26.7%39.7%0
20136,26229.8%30.7%42.5%0

What fails, by mileage

Share of MOT tests that failed on each system. Wear items (bulbs, tyres, wipers, plates) are excluded from the reliability score.

System0-50k km50-100k km100-150k km150k+ km
Mechanical fail3.5% (2.5)10.2% (9.1)21.8% (21.9)32.0% (31.5)
Tests22,52428,70113,9537,075
Suspension and wheels0.5% (0.4)2.4% (1.2)8.1% (3.7)15.4% (9.0)
Brakes1.6% (0.9)4.5% (3.4)9.4% (5.9)14.4% (7.8)
Engine, exhaust and emissions0.7% (0.4)1.3% (0.7)3.0% (1.9)3.7% (4.2)
Steering0.6% (0.1)1.9% (0.2)3.7% (0.6)6.1% (1.8)
Body, chassis and corrosion0.6% (0.1)1.9% (0.5)5.3% (1.4)8.2% (4.1)
Seat belts and airbags0.3% (0.2)0.6% (0.4)1.1% (0.6)2.7% (0.7)
Lights and electrics (wear)7.2% (1.9)14.5% (3.8)19.3% (8.7)26.3% (14.8)
Tyres (wear)3.0% (3.2)5.2% (5.1)6.7% (6.8)7.8% (8.0)
Wipers and windscreen (wear)4.4% (2.7)6.8% (3.4)6.9% (3.9)7.5% (5.2)
Other and plates (wear)0.1% (0.1)0.1% (0.1)0.3% (0.2)0.5% (0.3)

(…) = Class median, same age and mileage

Pre-purchase checklist for the mechanic

Built from the systems where this model fails more often than its class at 100,000 km and above, and from open recalls.

  1. Brakes: measure discs and pads, check brake pipes and hoses for corrosion, and test the handbrake and ABS warning light.
  2. Suspension and wheels: check arms, bushes, ball joints, springs and shock absorbers for play, cracks and leaks; look for uneven tyre wear.
  3. Steering: check for play in the rack, track rod ends and column, power-steering leaks and noise on full lock.
  4. Recalls: ask for proof that open recall work for this model has been done (the dealer can check by VIN).

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2026

    The rear suspension springs may not have been manufactured with the required dimensions, which could cause the left or right rear spring to break. If this occurs, the vehicle may sag and the broken spring could fall…

    Full text

    The rear suspension springs may not have been manufactured with the required dimensions, which could cause the left or right rear spring to break. If this occurs, the vehicle may sag and the broken spring could fall onto the road, increasing the risk of an accident for the vehicle occupants and other road users.

    SR/01939/26 ↗
  • EU Safety Gate2024

    The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P…

    Full text

    The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P button is pressed on the transmission selector, when the engine is switched off, when the driver’s safety-belt is released or when the driver door is opened. This increases the risk of accidents and injuries, although the Assisted Parking Brake (APB) remains functional and allows the vehicle to be immobilised.

    SR/03178/25 ↗
  • EU Safety GateSerious2024

    Due to an inappropriate manufacturing process, the gasket seal between the solenoid valve block and the LPG container may be missing. This can cause an LPG leak. As LPG is inflammable, there is a risk of the vehicle…

    Full text

    Due to an inappropriate manufacturing process, the gasket seal between the solenoid valve block and the LPG container may be missing. This can cause an LPG leak. As LPG is inflammable, there is a risk of the vehicle catching fire.

    SR/01506/25 ↗
  • EU Safety Gate2024, 2025

    The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P…

    Full text

    The position sensor of the parking brake actuator is at the wrong angle, causing the stopping pin to be incorrectly placed in the ‘P lock’ position and resulting in the parking brake not properly engaging when the P button is pressed on the transmission selector, when the engine is switched off, when the driver’s safety-belt is released or when the driver door is opened. This increases the risk of accidents and injuries, although the Assisted Parking Brake (APB) remains functional and allows the vehicle to be immobilised.

    OR/00152/25 ↗
  • EU Safety GateSerious2023, 2024

    A decoupling of the R107 connector, which may not have been secured properly at the factory can cause a loss of electrical connection between the engine and driver's cabin wiring. As a result, drivers may experience a…

    Full text

    A decoupling of the R107 connector, which may not have been secured properly at the factory can cause a loss of electrical connection between the engine and driver's cabin wiring. As a result, drivers may experience a loss of traction, reduced steering assistance, and malfunctioning airbags, parking sensors, and brakes. This can increase the risk of accidents and injuries.

    A12/03197/24 ↗