Mercedes-Benz A-Class 2017: reliability
40,690 MOT tests of Mercedes-Benz A-Class cars first registered in 2017: 8.5% failed for a mechanical defect; the class median at the same age and mileage is 6.8%.
- Mechanical failure rate
- 8.5%
- Class median, same age and mileage
- 6.8%
- Failed MOT (any reason)
- 19.9%
- MOT tests
- 40,690
- Recalls
- 13
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 3,761 | 3.5% | 3.5% |
| 50-100k km | 21,633 | 7.3% | 5.7% |
| 100-150k km | 12,504 | 10.7% | 8.4% |
| 150k+ km | 2,792 | 14.4% | 11.5% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Full text
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…
A12/00940/24 ↗Full text
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Full text
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to…
A12/00857/21 ↗Full text
A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to become detached over time.This would impair the vehicle’s steerability, increasing the risk of an accident.
The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending…
A12/01206/20 ↗Full text
The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending up in the footwells of the driver and passenger side and in the central tunnel. As a result, any electrical components installed there could be corroded and/or subjected to short circuits or leakage currents. As a consequence, the SRS control unit could stop working, the vehicle may fail to start, the engine emergency run could be activated while driving, and the functioning of other components (e.g. the fuel pump, automatic/manual emergency call) could be adversely affected.
The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person…
A12/00346/20 ↗Full text
The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person as a child seat. As a result, the passenger airbag could be activated despite the presence of a child seat or the passenger airbag could fail to activate despite the presence of a person on the passenger seat, increasing the risk of injuries.
Show 7 more recalls
No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp…
A12/0162/19 ↗Full text
No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp edges could be created on the instrument panel in the airbag's deployment area, damaging the airbag. Moreover, parts of the instrument panel may become detached, increasing the risk of injury to the occupants.
The welding of the mounting brackets on the ISOFIX child seat attachments may be inadequate. The mounting brackets could fail in the event of an accident.
A12/0876/18 ↗Certain welding points in the area of the front wheel arch may be missing. If these welding points are not present, the structural behaviour of the vehicle's front section would be affected in the event of a crash.
A12/0863/18 ↗The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the…
A12/0829/18 ↗Full text
The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the passenger airbag.
null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.
A12/1733/17 ↗null The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.
A12/1352/17 ↗null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead…
A12/0763/17 ↗Full text
null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.