Mercedes-Benz A-Class 2017: fiabilidad
40.690 inspecciones MOT de Mercedes-Benz A-Class matriculados por primera vez en 2017: el 8,5 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 6,8 %.
- Tasa de fallo mecánico
- 8,5%
- Mediana de la clase, misma edad y kilometraje
- 6,8%
- No pasó la MOT (cualquier motivo)
- 19,9%
- inspecciones MOT
- 40.690
- Llamadas a revisión
- 13
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 3761 | 3,5% | 3,5% |
| 50-100k km | 21.633 | 7,3% | 5,7% |
| 100-150k km | 12.504 | 10,7% | 8,4% |
| 150k+ km | 2792 | 14,4% | 11,5% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…
A12/00730/21 ↗Texto completo
The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…
A12/00940/24 ↗Texto completo
The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…
A12/00017/22 ↗Texto completo
A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.
A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to…
A12/00857/21 ↗Texto completo
A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to become detached over time.This would impair the vehicle’s steerability, increasing the risk of an accident.
The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending…
A12/01206/20 ↗Texto completo
The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending up in the footwells of the driver and passenger side and in the central tunnel. As a result, any electrical components installed there could be corroded and/or subjected to short circuits or leakage currents. As a consequence, the SRS control unit could stop working, the vehicle may fail to start, the engine emergency run could be activated while driving, and the functioning of other components (e.g. the fuel pump, automatic/manual emergency call) could be adversely affected.
The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person…
A12/00346/20 ↗Texto completo
The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person as a child seat. As a result, the passenger airbag could be activated despite the presence of a child seat or the passenger airbag could fail to activate despite the presence of a person on the passenger seat, increasing the risk of injuries.
Mostrar 7 llamadas más
No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp…
A12/0162/19 ↗Texto completo
No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp edges could be created on the instrument panel in the airbag's deployment area, damaging the airbag. Moreover, parts of the instrument panel may become detached, increasing the risk of injury to the occupants.
The welding of the mounting brackets on the ISOFIX child seat attachments may be inadequate. The mounting brackets could fail in the event of an accident.
A12/0876/18 ↗Certain welding points in the area of the front wheel arch may be missing. If these welding points are not present, the structural behaviour of the vehicle's front section would be affected in the event of a crash.
A12/0863/18 ↗The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the…
A12/0829/18 ↗Texto completo
The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the passenger airbag.
null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.
A12/1733/17 ↗null The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.
A12/1352/17 ↗null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead…
A12/0763/17 ↗Texto completo
null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.