AutoDefects
Deutsch

Mercedes-Benz A-Class 2017: Zuverlässigkeit

26% mehr technische Mängel als die Klasse

40.690 MOT-Prüfungen von Mercedes-Benz A-Class mit Erstzulassung 2017: 8,5% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 6,8%.

Technische Mängelquote
8,5%
Klassenmedian, gleiches Alter und gleiche Laufleistung
6,8%
Durchgefallen (jeder Grund)
19,9%
MOT-Prüfungen
40.690
Rückrufe
13

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km3.7613,5%3,5%
50-100k km21.6337,3%5,7%
100-150k km12.50410,7%8,4%
150k+ km2.79214,4%11,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder3,7%
Bremsen3,1%
Motor, Abgasanlage und Emissionen1,9%
Lenkung0,1%
Karosserie, Rahmen und Rost0,3%
Gurte und Airbags0,4%
Licht und Elektrik (Verschleiß)3,8%
Reifen (Verschleiß)8,7%
Wischer und Scheibe (Verschleiß)3,6%
Sonstiges und Kennzeichen (Verschleiß)0,4%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2012–2020

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…

    Volltext

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.

    A12/00730/21 ↗
  • EU Safety GateErnst2017–2024

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…

    Volltext

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.

    A12/00940/24 ↗
  • EU Safety GateErnst2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Volltext

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety Gate2016, 2017

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to…

    Volltext

    A bore hole in the universal joint on the steering shaft may have incorrect size. As a result, there could be play between the bearing fitted into the bore hole and the universal joint, which could cause the joint to become detached over time.This would impair the vehicle’s steerability, increasing the risk of an accident.

    A12/00857/21 ↗
  • EU Safety Gate2017–2019

    The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending…

    Volltext

    The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending up in the footwells of the driver and passenger side and in the central tunnel. As a result, any electrical components installed there could be corroded and/or subjected to short circuits or leakage currents. As a consequence, the SRS control unit could stop working, the vehicle may fail to start, the engine emergency run could be activated while driving, and the functioning of other components (e.g. the fuel pump, automatic/manual emergency call) could be adversely affected.

    A12/01206/20 ↗
  • EU Safety GateErnst2014–2017

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person…

    Volltext

    The occupant classification system for the front passenger seat may not be calibrated in accordance with the specifications. Consequently, an installed child seat may be identified as a person or a small, light person as a child seat. As a result, the passenger airbag could be activated despite the presence of a child seat or the passenger airbag could fail to activate despite the presence of a person on the passenger seat, increasing the risk of injuries.

    A12/00346/20 ↗
7 weitere Rückrufe anzeigen
  • EU Safety GateErnst2017, 2018

    No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp…

    Volltext

    No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp edges could be created on the instrument panel in the airbag's deployment area, damaging the airbag. Moreover, parts of the instrument panel may become detached, increasing the risk of injury to the occupants.

    A12/0162/19 ↗
  • EU Safety Gate2017, 2018

    The welding of the mounting brackets on the ISOFIX child seat attachments may be inadequate. The mounting brackets could fail in the event of an accident.

    A12/0876/18 ↗
  • EU Safety Gate2017, 2018

    Certain welding points in the area of the front wheel arch may be missing. If these welding points are not present, the structural behaviour of the vehicle's front section would be affected in the event of a crash.

    A12/0863/18 ↗
  • EU Safety GateErnst2017

    The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the…

    Volltext

    The adhesion of the lower part of the windscreen to the bodywork may be inadequate. In the event of an accident, the windscreen could become detached from the bodywork, thus compromising the protective effect of the passenger airbag.

    A12/0829/18 ↗
  • EU Safety GateErnst2011–2017

    null The steering column is not sufficiently earthed. As a result, in the event of an electrostatic discharge, the driver's airbag may be triggered when not required. This could cause an accident.

    A12/1733/17 ↗
  • EU Safety GateErnst2014–2017

    null The starter current limiter may be overloaded and overheat. As a consequence, the surrounding components could ignite, leading to a fire.

    A12/1352/17 ↗
  • EU Safety GateErnst2016, 2017

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead…

    Volltext

    null The mixture ratio of the fuel in the inflators of the front-passenger knee, pelvic and side curtain airbags may not be correct. In the event of an accident requiring the deployment of the airbags, this could lead to the airbags not inflating properly.

    A12/0763/17 ↗