AutoDefects
English

Mercedes-Benz A-Class 2018: reliability

37% more mechanical failures than the class

41,304 MOT tests of Mercedes-Benz A-Class cars first registered in 2018: 7.2% failed for a mechanical defect; the class median at the same age and mileage is 5.3%.

Mechanical failure rate
7.2%
Class median, same age and mileage
5.3%
Failed MOT (any reason)
16.3%
MOT tests
41,304
Recalls
18

What fails, by mileage

MileageTestsMechanical failClass median
0-50k km7,5484.1%2.7%
50-100k km25,3497.3%5.1%
100-150k km7,3979.7%7.7%
150k+ km1,01011.9%9.8%

What fails on this year

SystemMechanical fail
Suspension and wheels1.6%
Brakes3.1%
Engine, exhaust and emissions1.3%
Steering0.1%
Body, chassis and corrosion0.4%
Seat belts and airbags1.6%
Lights and electrics (wear)2.3%
Tyres (wear)7.3%
Wipers and windscreen (wear)2.6%
Other and plates (wear)0.4%

Official recalls

Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.

  • EU Safety Gate2012–2020

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate…

    Full text

    The polycarbonate roof panel located between the windscreen and the panoramic roof may not have been bonded correctly to the vehicle during a prior repair. In such cases, the adhesive bonding could gradually deteriorate and the panel could become detached from the vehicle, posing a risk to other road users.

    A12/00730/21 ↗
  • EU Safety GateSerious2017–2024

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of…

    Full text

    The steering software may not correctly activate the fallback level in the event of a hardware failure. This could affect the power steering assistance and lead to the loss of steering capacity, increasing the risk of an accident.

    A12/00940/24 ↗
  • EU Safety GateSerious2016–2020

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the…

    Full text

    A trapped particle may damage the sealing between the fuel rail and fuel injector, which could cause fuel to leak into the engine compartment. Consequently, leaking fuel may come into contact with hot parts of the engine, increasing the risk of fire.

    A12/00017/22 ↗
  • EU Safety GateSerious2018–2020

    The quantity of oil in the dual-clutch gearbox may be too low or too high.This can result in impaired torque transmission, gearbox failure and potentially increased CO2 emissions.In addition, in extreme driving…

    Full text

    The quantity of oil in the dual-clutch gearbox may be too low or too high.This can result in impaired torque transmission, gearbox failure and potentially increased CO2 emissions.In addition, in extreme driving situations, gearbox oil might leak onto the road, posing a risk to the following traffic.Moreover, the leaking gearbox oil might come into contact with hot components, increasing the risk of fire.

    A12/01763/20 ↗
  • EU Safety GateSerious2018–2020

    The quantity of oil in the dual-clutch gearbox may be too high.This can result in impaired torque transmission and potentially increased CO2 emissions.In addition, in extreme driving situations, gearbox oil might leak…

    Full text

    The quantity of oil in the dual-clutch gearbox may be too high.This can result in impaired torque transmission and potentially increased CO2 emissions.In addition, in extreme driving situations, gearbox oil might leak onto the road, posing a risk to the following traffic.Moreover, the leaking gearbox oil might come into contact with hot components, increasing the risk of fire.

    A12/01768/20 ↗
  • EU Safety Gate2017–2019

    The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending…

    Full text

    The condensed water drainage hose of the air-conditioning system may not be properly fitted. In such a case condensed water from the air conditioning system could enter the passenger compartment of the vehicle, ending up in the footwells of the driver and passenger side and in the central tunnel. As a result, any electrical components installed there could be corroded and/or subjected to short circuits or leakage currents. As a consequence, the SRS control unit could stop working, the vehicle may fail to start, the engine emergency run could be activated while driving, and the functioning of other components (e.g. the fuel pump, automatic/manual emergency call) could be adversely affected.

    A12/01206/20 ↗
Show 9 more recalls
  • EU Safety Gate2018

    The glass pane on the lifting/sliding panorama roof may not have been properly affixed. As a result, it may become completely detached, posing a risk to the following traffic.

    A12/00237/20 ↗
  • EU Safety Gate2018

    A weld on the seat-height adjustment system of the left-hand front seat may be defective and can break, causing the seat cushion to tilt forward in the event of a crash. As a result, the protective effect of the…

    Full text

    A weld on the seat-height adjustment system of the left-hand front seat may be defective and can break, causing the seat cushion to tilt forward in the event of a crash. As a result, the protective effect of the restraint system will be impaired, increasing the risk of an injury.

    A12/00040/20 ↗
  • EU Safety Gate2018

    The belt anchor fittings for the front seats may not have been attached in accordance with the specifications. As a result, the anchor fittings could be detached in the event of an accident, increasing the risk of an…

    Full text

    The belt anchor fittings for the front seats may not have been attached in accordance with the specifications. As a result, the anchor fittings could be detached in the event of an accident, increasing the risk of an injury to the occupants.

    A12/1892/19 ↗
  • EU Safety Gate2018, 2019

    The welding of the brake pedal plate to the brake pedal lever may not be sufficiently strong. Applying pressure on the left side of the brake pedal might cause the pedal plate to tilt sideways from the pedal lever. This…

    Full text

    The welding of the brake pedal plate to the brake pedal lever may not be sufficiently strong. Applying pressure on the left side of the brake pedal might cause the pedal plate to tilt sideways from the pedal lever. This would impair the operation of the brake pedal, increasing the risk of an accident.

    A12/0948/19 ↗
  • EU Safety Gate2018

    A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for…

    Full text

    A bolt in the locking mechanism of the articulated trailer coupling is defective. It could break while a trailer is being towed and consequently the trailer could detach, thus increasing the risk of an accident for following traffic.

    A12/0267/19 ↗
  • EU Safety Gate2018

    The locking mechanisms of the right and/or left backrest might not lock correctly. This might impair the restraining effect of the backrest so that in the event of an accident there would be an increased risk of injury…

    Full text

    The locking mechanisms of the right and/or left backrest might not lock correctly. This might impair the restraining effect of the backrest so that in the event of an accident there would be an increased risk of injury to the occupants.

    A12/0269/19 ↗
  • EU Safety GateSerious2017, 2018

    No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp…

    Full text

    No perforation has been made in the outer covering of the instrument panel to enable the deployment of the passenger airbag. In the event of an accident involving deployment of the airbag at low temperatures, sharp edges could be created on the instrument panel in the airbag's deployment area, damaging the airbag. Moreover, parts of the instrument panel may become detached, increasing the risk of injury to the occupants.

    A12/0162/19 ↗
  • EU Safety GateSerious2018

    The flat conductor of the starter wiring has been incorrectly positioned, damaging the insulation of the flat conductor. The direct contact between the flat conductor and the car body may consequently lead to a short…

    Full text

    The flat conductor of the starter wiring has been incorrectly positioned, damaging the insulation of the flat conductor. The direct contact between the flat conductor and the car body may consequently lead to a short circuit and fire.

    A12/0147/19 ↗
  • EU Safety Gate2018

    A metal chip formed during the assembly process within the ESP hydraulic unit could block a non-return valve. As a consequence, the non-return valve might no longer be able to close, affecting performance of the…

    Full text

    A metal chip formed during the assembly process within the ESP hydraulic unit could block a non-return valve. As a consequence, the non-return valve might no longer be able to close, affecting performance of the brake-pedal. This could increase the risk of an accident.

    A12/0138/19 ↗