Audi A4 2010: reliability
13,049 MOT tests of Audi A4 cars first registered in 2010: 23.0% failed for a mechanical defect; the class median at the same age and mileage is 23.3%.
- Mechanical failure rate
- 23.0%
- Class median, same age and mileage
- 23.3%
- Failed MOT (any reason)
- 32.3%
- MOT tests
- 13,049
- Recalls
- 7
What fails, by mileage
| Mileage | Tests | Mechanical fail | Class median |
|---|---|---|---|
| 0-50k km | 32 | 6.3% | 6.7% |
| 50-100k km | 386 | 11.9% | 11.9% |
| 100-150k km | 1,537 | 15.3% | 17.8% |
| 150k+ km | 11,094 | 24.5% | 24.5% |
What fails on this year
Official recalls
Recalls published by the US NHTSA and the EU Safety Gate that name this model. Check by VIN whether a specific car is affected.
The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants.
SR/00790/26 ↗The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
A12/00788/23 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/01957/24 ↗The vehicles are equipped with control software regarded as unauthorised by the competent authorities.
A12/01220/21 ↗The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity…
A12/00884/21 ↗Full text
The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The Takata gas generator housing could burst when the passenger airbag is deployed. This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.
A12/01891/20 ↗
Show 1 more recalls
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control…
A12/0834/19 ↗Full text
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control via the manual control device.