Audi A4 2010: fiabilidad
13.049 inspecciones MOT de Audi A4 matriculados por primera vez en 2010: el 23,0 % no pasó por un defecto mecánico; la mediana de su clase con la misma edad y kilometraje es del 23,3 %.
- Tasa de fallo mecánico
- 23,0%
- Mediana de la clase, misma edad y kilometraje
- 23,3%
- No pasó la MOT (cualquier motivo)
- 32,3%
- inspecciones MOT
- 13.049
- Llamadas a revisión
- 7
Qué falla según el kilometraje
| Kilometraje | Inspecciones | Fallo mecánico | Mediana de la clase |
|---|---|---|---|
| 0-50k km | 32 | 6,3% | 6,7% |
| 50-100k km | 386 | 11,9% | 11,9% |
| 100-150k km | 1537 | 15,3% | 17,8% |
| 150k+ km | 11.094 | 24,5% | 24,5% |
Qué falla en este año
Llamadas a revisión oficiales
Campañas publicadas por la NHTSA (EE. UU.) y el EU Safety Gate que citan este modelo. Comprueba por VIN si afecta a un coche concreto.
The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants.
SR/00790/26 ↗The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
A12/00788/23 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/01957/24 ↗The vehicles are equipped with control software regarded as unauthorised by the competent authorities.
A12/01220/21 ↗The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity…
A12/00884/21 ↗Texto completo
The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The Takata gas generator housing could burst when the passenger airbag is deployed. This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.
A12/01891/20 ↗
Mostrar 1 llamadas más
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control…
A12/0834/19 ↗Texto completo
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control via the manual control device.