Audi A4 2010: niezawodność
13 049 badań MOT egzemplarzy Audi A4 zarejestrowanych po raz pierwszy w 2010: 23,0% nie przeszło z powodu usterki mechanicznej; mediana klasy w tym samym wieku i z tym samym przebiegiem to 23,3%.
- Usterki mechaniczne
- 23,0%
- Mediana klasy, ten sam wiek i przebieg
- 23,3%
- Negatywne badanie (dowolny powód)
- 32,3%
- badań MOT
- 13 049
- Akcje przywoławcze
- 7
Co się psuje w zależności od przebiegu
| Przebieg | Badania | Usterki mechaniczne | Mediana klasy |
|---|---|---|---|
| 0-50k km | 32 | 6,3% | 6,7% |
| 50-100k km | 386 | 11,9% | 11,9% |
| 100-150k km | 1537 | 15,3% | 17,8% |
| 150k+ km | 11 094 | 24,5% | 24,5% |
Co się psuje w tym roczniku
Oficjalne akcje przywoławcze
Akcje opublikowane przez NHTSA (USA) i EU Safety Gate, w których wymieniono ten model. Czy dotyczą konkretnego auta, sprawdź po VIN.
The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants.
SR/00790/26 ↗The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.
A12/00788/23 ↗The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.
A12/01957/24 ↗The vehicles are equipped with control software regarded as unauthorised by the competent authorities.
A12/01220/21 ↗The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity…
A12/00884/21 ↗Pełny tekst
The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.
The Takata gas generator housing could burst when the passenger airbag is deployed. This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.
A12/01891/20 ↗
Pokaż jeszcze 1 akcji
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control…
A12/0834/19 ↗Pełny tekst
The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control via the manual control device.