AutoDefects
Deutsch

Audi A4 2010: Zuverlässigkeit

Im Klassendurchschnitt

13.049 MOT-Prüfungen von Audi A4 mit Erstzulassung 2010: 23,0% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 23,3%.

Technische Mängelquote
23,0%
Klassenmedian, gleiches Alter und gleiche Laufleistung
23,3%
Durchgefallen (jeder Grund)
32,3%
MOT-Prüfungen
13.049
Rückrufe
7

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km326,3%6,7%
50-100k km38611,9%11,9%
100-150k km1.53715,3%17,8%
150k+ km11.09424,5%24,5%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder12,5%
Bremsen5,4%
Motor, Abgasanlage und Emissionen5,0%
Lenkung1,0%
Karosserie, Rahmen und Rost7,3%
Gurte und Airbags1,0%
Licht und Elektrik (Verschleiß)9,6%
Reifen (Verschleiß)7,7%
Wischer und Scheibe (Verschleiß)4,4%
Sonstiges und Kennzeichen (Verschleiß)0,5%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety GateErnst2004–2013

    The driver airbag inflator may cause uncontrolled inflation and release metal fragments when the airbag is activated, which can cause injury to the occupants.

    SR/00790/26 ↗
  • EU Safety GateErnst2003–2011

    The airbag may deteriorate over time and if deployed, excessive internal pressure may cause the inflator body to burst and metal fragments could pass through the cushion material causing injury to occupants.

    A12/00788/23 ↗
  • EU Safety GateErnst2004–2013

    The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants.

    A12/01957/24 ↗
  • EU Safety Gate2009–2019

    The vehicles are equipped with control software regarded as unauthorised by the competent authorities.

    A12/01220/21 ↗
  • EU Safety GateErnst2003–2011

    The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity…

    Volltext

    The propellant used in the airbag inflator of the passenger airbags, manufactured by Takata, may experience a material alteration over time due to degradation occurring after prolonged exposure to high absolute humidity and high-temperature cycling. In the event of an airbag being deployed, the excessive internal pressure may cause the inflator body to rupture and metal fragments may pass through the cushion material causing injury to the occupants.

    A12/00884/21 ↗
  • EU Safety GateErnst2004–2011

    The Takata gas generator housing could burst when the passenger airbag is deployed. This may cause small metal parts to become detached from the housing, posing a risk of injury to the occupants.

    A12/01891/20 ↗
1 weitere Rückrufe anzeigen
  • EU Safety Gate2005–2013

    The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control…

    Volltext

    The handheld control unit for throttle and brake may develop a fracture in a welded joint in the relay mechanism. If this damage occurs this may lead to impaired functioning or even failure of the brake and gas control via the manual control device.

    A12/0834/19 ↗