AutoDefects
Deutsch

Nissan Juke 2019: Zuverlässigkeit

15% mehr technische Mängel als die Klasse

19.089 MOT-Prüfungen von Nissan Juke mit Erstzulassung 2019: 5,7% fielen wegen eines technischen Mangels durch; der Klassenmedian bei gleichem Alter und gleicher Laufleistung liegt bei 4,9%.

Technische Mängelquote
5,7%
Klassenmedian, gleiches Alter und gleiche Laufleistung
4,9%
Durchgefallen (jeder Grund)
16,0%
MOT-Prüfungen
19.089
Rückrufe
2

Was nach Laufleistung ausfällt

LaufleistungPrüfungenTechnische MängelKlassenmedian
0-50k km9.3663,4%2,6%
50-100k km8.8037,4%6,8%
100-150k km88011,0%10,3%
150k+ km4025,0%10,1%

Was bei diesem Baujahr ausfällt

BaugruppeTechnische Mängel
Fahrwerk und Räder1,5%
Bremsen3,1%
Motor, Abgasanlage und Emissionen0,5%
Lenkung0,2%
Karosserie, Rahmen und Rost0,3%
Gurte und Airbags0,6%
Licht und Elektrik (Verschleiß)2,4%
Reifen (Verschleiß)4,2%
Wischer und Scheibe (Verschleiß)7,0%
Sonstiges und Kennzeichen (Verschleiß)0,1%

Amtliche Rückrufe

Rückrufe der US-Behörde NHTSA und des EU Safety Gate, die dieses Modell nennen. Ob ein bestimmtes Auto betroffen ist, per FIN prüfen.

  • EU Safety Gate2019, 2020

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be…

    Volltext

    Due to a design change introducing an internal chamfer in the rear seat back lock button, the latch actuation rod can catch on this chamfer, preventing its upwards movement.As a result the rear seat back may not be securely latched when returned to its upright position after folding, and the occupant of the rear seat and any items stored in the luggage compartment may not be correctly restrained in the event of an accident, increasing the risk of injury.

    A12/01430/21 ↗
  • EU Safety GateErnst2019

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the…

    Volltext

    Due to an error in the driver's airbag folding process, the heat shield may not move fully into position around the inflator when the airbag is activated.Consequently, hot gas can directly contact the front panel of the airbag, causing burn damage to the bag material. As a result, the airbag may tear during inflation reducing its protective function.

    A12/00391/21 ↗